5.1.5 USB data upload
Long press “ ” to turn on the device to enter to the main interface, insert one end of the USB
data line into USB interface as Figure5.16, the other end to the USB interface of PC as Figure
5.17, the connection mode from the device to PC is shown as Figure5.18. After a new drive letter
appears in computer, double-click it to open it to find the data recorded, which can be copied
from the device and saved to any disk in my computer. Open the file recorded by the PC software
to analyze the patient’s sleep information (power on - insert the USB data line - open my
computer - open the device drive letter - copy the “.bin” file generated to PC hard disk to avoid
data missing).
Figure 5.16 Sketch map for connection between Sleep apnea screen meter and USB data line
To Next Page
Loading...
