Gima RS01 - Page 179

76
Guidance and manufacturer’s declaration
Table 2
Guidance and manufacturer’s declaration-electromagnetic immunity
The Sleep apnea screen meter is intended for use in the electromagnetic environment specified
below. The purchaser or the user of Sleep apnea screen meter should assure that it is used in
such an environment.
Immunity test
IEC60601 test
level
Compliance level
Electromagnetic
environment-guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2
±6 kV contact
±8 kV air
±6 kV contact
±8 kV air
Floors should be wood,
concrete or ceramic tile. If
floor are covered with
synthetic material, the
relative humidity should be
at least 30 %.