Gioteck SC3 PRO - Controller Features and Functions; LED Bar Status and Customization

Low Power: The LED bar blinks red.
Charging: The LED bar blinks orange.
Connected to power and fully charged: The LED bar will turn o.
Pairing mode: When the Home button is pressed, the LED bar flashes white.
Programming back buttons: When the Program button is pressed, the LED bar flashes white
Customizing the colours: See the next section in this manual.
UNDERSTANDING THE LED BAR
• The default colour of the LED bar is orange but it can be set to your preference.
• Press the Program button to cycle through dierent colour settings. Aer the solid colour settings,
there is fast rainbow eect followed by a slower eect. Each press of the Program button advances the cycle.
• Aer the LED bar cycles these settings, the last setting is o.
• Pressing the Program button from the LED o setting restarts the cycle.
CUSTOMIZING THE LED BAR
04