Why is my GIWEE R32 Air Conditioner blowing mist?
When the room humidity is relatively high, the cooling or defrosting process in heating mode ends, the air outlet may release water mist. This is a normal physical phenomenon.
What to do if GIWEE R32 Air Conditioner won't stop blowing air after shut down?
If your GIWEE Air Conditioner doesn't blow air immediately after shutting down in cooling mode, the drying function may be enabled. Wait for it to finish, or use the remote to disable it. Also, the louver will close after 30 seconds.
Why is no air blowing out at the start of heating operation in GIWEE Air Conditioner?
If your GIWEE Air Conditioner doesn't blow air when starting heating, it's preventing cold air from blowing until the indoor heat exchanger warms up. This usually takes 2 to 5 minutes.
Why is my GIWEE R32 not blowing air for 6-12 minutes in heating mode?
If your GIWEE Air Conditioner doesn't blow air for 6 to 12 minutes in heating mode, it might be defrosting automatically due to low outdoor temperature and high humidity. Please wait. Water or steam may come from the outdoor unit during defrosting.
Why is air not blowing out during dehumidification operation in my GIWEE R32 Air Conditioner?
If your GIWEE Air Conditioner doesn't blow air during dehumidification, the indoor fan might stop to prevent moisture evaporation and save energy.
How to restart GIWEE Air Conditioner immediately after shut down?
To protect the unit, there is a 3-minute delay before a GIWEE Air Conditioner can restart after being shut down, indicated by the RUN lamp being ON. This protection timer activates automatically when power is connected.
Essential safety guidelines for installation and product usage.
Precautions regarding electrical connections, power cords, and avoiding shock.
Guidelines for safe cleaning procedures and maintenance, avoiding damage.
Details on model numbers, piping limits, and electrical wiring diagrams.
Understanding the unit's display indicators and built-in safety mechanisms.
Details on ventilation, cooling, dehumidification, and heating modes of operation.
Using auto mode, timers, sleep, step motor, self-clean, and I FEEL functions.
ECO, room card, 8°C heating, Wi-Fi, leak detection, turbo, and memory functions.
Instructions for mounting the indoor unit, including clearances and wall plate.
Steps for selecting the outdoor unit location and installing the drain joint.
Connecting pipes, air evacuation, and refrigerant charging procedures.
Critical safety warnings before performing troubleshooting tasks.
Troubleshooting common operational behaviors that are not actual errors.
Detailed list of error codes and their corresponding troubleshooting steps.
Methods for entering and using the spot check function for diagnostics.
Reference tables for temperature sensor resistance values (T1-T4 and T5).
General| Brand | GIWEE |
|---|---|
| Model | R32 |
| Category | Air Conditioner |
| Language | English |
To Next Page
