• MT300N-V2 series: https://dl.gl-inet.com/firmware/mt300n-v2/
Find the available firmwares from the folder according to your device model, and
they are located in different sub-folders:
v1: Official GL.iNet OpenWrt/LEDE firmware.
vlean: Clean versions of OpenWrt/LEDE firmware with Luci admin page only.
tor: Tor firmware.
testing: Beta version of GL.iNet OpenWrt/LEDE firmware.
nand (AR300M only): Firmware for the 128MB Nand flash of GL-AR300M and GL-
AR300M-Ext.
Note: The firmware files inside the Nand folder are for GL-AR300M and GL-
AR300M-Ext only since these two models have 128MB Nand flash. You have to
upload by using the .tar file. The .img file can only be used in Uboot.
(2) Compile your own firmware
You can compile your own firmware and flash to the router. Please refer to
github.com/domino-team/openwrt-cc.
(3) Third party firmware
You may also try other firmwares such as DDWRT.
Note: If you uploaded an incompatible firmware thus bricked the router, please use
Uboot to re-install the correct firmware.
5.3. Auto Upgrade
You can enable auto upgrade. The router will search for available update and
upgrade automatically according to the time that you set.
To Next Page
Loading...
Need help?
General
