Glacier bay KAGAN 21-K153KCP-GB User Manual (English)

Questions and Answers:

M
Marcus SimmonsAug 7, 2025
What to do if there is no water pressure in Glacier Bay Plumbing Product?
- C
  Craig AustinAug 7, 2025
  If you're experiencing no or low water pressure from your Glacier Bay Plumbing Product after using it for a while, there could be a blockage in the hose or debris trapped in the supply line connectors. To resolve this, first, try removing the spray head and flushing the hose assembly. If the water flow remains slow, the issue might be with debris inside the supply line connectors. In that case, shut off the water supply, disconnect the lines, clean out any debris, and then reattach and tighten them. Be careful not to overtighten. Finally, turn the water supply back on.
R
Ryan ChristensenAug 13, 2025
Why is my Glacier Bay Plumbing Product faucet leaking around the aerator?
- R
  reginadouglasAug 14, 2025
  If your Glacier Bay Plumbing Product faucet leaks around the aerator, it's likely due to the aerator not being fitted correctly, being dirty, or having small parts improperly installed inside. To fix this, remove the aerator from the spout on the faucet body. Check the black rubber gasket inside the aerator to ensure it's flat. Then, reinstall the aerator onto the spout.
B
brenda56Aug 19, 2025
How to fix an improper water pattern in Glacier Bay Plumbing Product?
- S
  samantha07Aug 19, 2025
  If your Glacier Bay Plumbing Product faucet has an improper water pattern, it is probably because the aerator is dirty or the small parts inside the aerator are not installed correctly. Remove the aerator from the spout on the faucet body and gently flush the small parts inside to remove any debris. Then, reinstall the aerator on the spout.
R
Richard MillerAug 25, 2025
Why won't the mounting nut tighten on my Glacier Bay Plumbing Product?
- J
  Jeffrey JohnsonAug 26, 2025
  If the mounting nut won't tighten on the faucet shank of your Glacier Bay Plumbing Product, it's probably because the quick-install mounting nut wasn't pushed upward over the faucet shank before rotating. Push the quick-install mounting nut upwards over the faucet shank until it is pressed firmly against the underside of the sink and turn to tighten.
C
Corey JamesAug 31, 2025
How to fix Glacier Bay Plumbing Product that won't completely shut off?
- T
  Thomas NorrisAug 31, 2025
  If the water doesn't completely shut off with your Glacier Bay Plumbing Product, it's likely because the ceramic cartridge discs are worn or have debris trapped inside. To resolve this, shut off the water supply, move the handle to the OFF position, unscrew the handle screw and remove the handle. Then, remove the bonnet and lift out the ceramic cartridge. Position the new ceramic cartridge into the faucet body, tightly screw the bonnet back in, and reinstall the handle.

Glacier bay KAGAN 21-K153KCP-GB Specifications

General

Brand	Glacier Bay
Model	KAGAN 21-K153KCP-GB
Category	Plumbing Product
Finish	Chrome
Flow Rate (gallons per minute)	1.2
Handle Style	Lever
Mounting Type	Deck Mount
Number of Faucet Holes Required	3
Color Family	Silver
Manufacturer Warranty	Limited Lifetime
Material	Metal
Included Components	Faucet, Mounting Hardware
Number of Handles	2-Handle