To Next PageTo Next PageWhat to do if the water continues to run in my Glacier Bay Toilet?
If water continues to run in your Glacier Bay Toilet, check to ensure the rubber seal gasket on the flush valve is completely closed. Remove any debris from the gasket surface and the sealing area of the flush valve that might prevent it from fully closing.
How to fix poor flush in Glacier bay TL-6900-EW?
To address a poor flush in your Glacier Bay Toilet: * Ensure the water level in the tank reaches the water line marked on the overflow tube of the flush valve. To raise the water level, turn the adjustment screw on the fill valve clockwise to raise the float cup. * Verify that the push rods are the correct length, ideally with a 1/16” gap above the flush valve's push buttons. Adjust by loosening the collar on the push rod and turning the rod counter-clockwise to extend its length, then tighten the collar to secure.
What to do if no water flows into the tank of Glacier bay TL-6900-EW Toilets?
If no water flows into the tank of your Glacier Bay Toilet: 1. Make sure the water supply valve is fully open. 2. Inspect the Debris Filter Screen for obstructions that might restrict water flow. To do this, shut off the water supply, disconnect the supply line, and remove any debris from inside the threaded shank. Reconnect and turn the water supply back on, checking for leaks.
General| Brand | Glacier Bay |
|---|---|
| Model | TL-6900-EW |
| Type | Two-Piece |
| Bowl Shape | Elongated |
| Color | White |
| Material | Vitreous China |
| Flush Valve Size | 2 inches |
| Rough-In Size | 12 inches |
Important safety warnings and handling instructions for the vitreous chinaware toilet.
Verify all parts are present and check required tools before assembly.
Steps for safely disconnecting and removing the existing toilet.
Instructions for correctly positioning and installing floor bolts.
Guidance on applying the wax ring to the toilet bowl outlet.
Steps for placing and seating the toilet bowl on the floor flange.
Instructions for fastening the toilet bowl to the floor.
Procedure for attaching the toilet tank to the bowl.
Instructions for setting the water flow for dual flush functionality.
Steps for connecting the water supply line to the tank.
Procedure for mounting the toilet seat and lid.
List of specific parts and their model numbers for repairs.
