Instruction Manual
& Safety Warnings
IMPORTANT: Even if you have the Pro Series 1730 Backup Sump
Pump System installed by someone else, you must read and follow
the safety information contained in this manual. Failure to do so
could result in property damage, serious injury, or death.
Battery Backup
Sump Pump
System
Table of Contents
Important Safety Warnings and
Instructions
Electrical Precautions 1
Battery Preparation 1
Battery Precautions 1
Introduction
Items Included in System 2
Additional Items Needed 2
System Specifications 2
Replacement Parts List 2
Pump & Pipe
Installation Instructions
Installation Options 3
Direct Discharge to Outside 4
Connection to Existing Discharge 5
Direct Discharge for Narrow Sumps 6
Connection to Existing Discharge for
Narrow Sumps 7
Battery Instructions
Preparation of the Battery 8
Control Unit Connections
Positioning the Float Switch 9
Connecting the Pump 9
Installing the Battery Fluid Sensor 9
Connecting the Battery 9
Connecting the Charger 9
Understanding the Warning
Lights and Alarms
Silencing the Alarm
During an Emergency 10
Battery Alarm 10
Cleaning Battery Terminals 10,11
Replacing the Battery 11,12
Fuse Alarm 12
Fluid Alarm 12,13
Pump Alarm 13
Replacing the Pump 13
Power Alarm 13
Charging 14
System Operating 14
Testing the System
Test-Reset-Silence Button 14
Testing the Float Switch 14
Parts & Service Information
Technical Support 14
Maintenance Check List 14
Warranty 14
Troubleshooting Guide 15
Other Products 15
To Next Page
Need help?
General
