To Next PageTo Next Page
Need help?Do you have a question about the Glentronics PHCC 2400 Pro Series and is the answer not in the manual?
Safety guidelines for electrical setup and handling of the pump system.
Steps and precautions for preparing the system's battery before installation.
Safety warnings and guidelines related to handling and working with batteries.
Lists all components included and those required for system setup.
Details available replacement parts and technical specifications of the pump system.
Overview of installation methods and choices for the pump system.
Details on installing the pump in standard sump pits.
Details on installing the pump in narrow sump pits.
Discusses compatibility with PHCC Pro Series batteries and general recommendations.
Steps for preparing, filling with acid, and activating the Pro Series standby battery.
Guidelines for regular maintenance and checking of the battery fluid level.
Connects the float switch, pump, and battery to the control unit for proper operation.
Steps for installing the fluid sensor into the battery for monitoring fluid levels.
Connects the control unit to AC power and covers initial setup procedures.
Procedures for silencing alarms temporarily or for 24 hours.
Addresses the warning light and alarm for low battery fluid level.
Covers warnings for corroded terminals, defective batteries, and lack of AC power.
Detailed steps for safely removing and replacing the system's battery.
Troubleshoots issues when the unit is not receiving AC power.
Addresses warnings related to a defective pump or blown DC fuse.
Explains the warning indicating the backup pump has been used.
Detailed steps for safely removing and installing a new pump.
Procedure for manually testing the float switch to ensure proper pump activation.
Instructions for connecting the control unit to a security system or alarm device.
Information on optional modules for remote notifications and home automation.
Details the purpose and use of the USB port for module communication.
A checklist of recommended tasks for system maintenance.
Provides contact information for technical support, parts, and service needs.
Outlines the terms, conditions, coverage, and exclusions of the product's limited warranty.
Explains the process for obtaining warranty service and the location for sending products.
Introduces other Pro Series pumps, float switches, check valves, and water alarms.
Safety guidelines for electrical setup and handling of the pump system.
Steps and precautions for preparing the system's battery before installation.
Safety warnings and guidelines related to handling and working with batteries.
Lists all components included and those required for system setup.
Details available replacement parts and technical specifications of the pump system.
Overview of installation methods and choices for the pump system.
Details on installing the pump in standard sump pits.
Details on installing the pump in narrow sump pits.
Discusses compatibility with PHCC Pro Series batteries and general recommendations.
Steps for preparing, filling with acid, and activating the Pro Series standby battery.
Guidelines for regular maintenance and checking of the battery fluid level.
Connects the float switch, pump, and battery to the control unit for proper operation.
Steps for installing the fluid sensor into the battery for monitoring fluid levels.
Connects the control unit to AC power and covers initial setup procedures.
Procedures for silencing alarms temporarily or for 24 hours.
Addresses the warning light and alarm for low battery fluid level.
Covers warnings for corroded terminals, defective batteries, and lack of AC power.
Detailed steps for safely removing and replacing the system's battery.
Troubleshoots issues when the unit is not receiving AC power.
Addresses warnings related to a defective pump or blown DC fuse.
Explains the warning indicating the backup pump has been used.
Detailed steps for safely removing and installing a new pump.
Procedure for manually testing the float switch to ensure proper pump activation.
Instructions for connecting the control unit to a security system or alarm device.
Information on optional modules for remote notifications and home automation.
Details the purpose and use of the USB port for module communication.
A checklist of recommended tasks for system maintenance.
Provides contact information for technical support, parts, and service needs.
Outlines the terms, conditions, coverage, and exclusions of the product's limited warranty.
Explains the process for obtaining warranty service and the location for sending products.
Introduces other Pro Series pumps, float switches, check valves, and water alarms.
General| Category | Water Pump |
|---|---|
| Type | Submersible Sump Pump |
| Horsepower | 1/2 HP |
| Voltage | 115V |
| Switch Type | Vertical Float Switch |
| Material | Cast Iron |
| Model | PHCC 2400 |
| Cord Length | 10 ft |
| Discharge Pipe Size | 1-1/2 in |
