GLK Flex Gear - Page 27

•
If both FLEX GEARs do not work
① 1. Check the cable: Check if the yellow power cable is disconnected or missing from
the control box. (YES=no problem / NO=disconnection or missing)
② Control box LED check: Check if the red LED of the control box is displayed when
the motorcycle is turned on. (YES=No problem / NO=Not confirmed)
③ Switch Check: Press the switch button and check if the green or yellow LED on the
control box is displayed (YES=LED OK / NO=LED Not Checked)
27
Error
1. Check cable
2. Check control box
LED
3. Check switch
Change control box
YES
Reconnect to cable
NO
Check ACC
NO
YES
YES
Change switch
NO