Global JUNO-NET User Manual

To do this press the ALARM SILENCE .
Pressing this button will:
Stop the sounders sounding
Make the panel buzzer intermittent
Light the AMBER ALARM SILENCE
Stop sounders queued for delayed
activation
The STATUS - FIRE will remain lit RED.
button
LED
LED
At the fire control panel, the STATUS -
FIRE will illuminate RED.
The fire control panel buzzer will
sound.
The location of the alarm (or alarms)
will be shown on the fire control panel
If more than one alarm has occurred
the QUEUE REVIEW FIRE will
RED indicating that further fire
reports can be displayed on the LCD
display by pressing the QUEUE
REVIEW FIRE .
If fitted, the external RED Zone LEDs
will be illuminated for the Zones in
FIRE.
LED
LCD display.
LED
button
flash
JUNO-NET
1.2 ALARM
If the fire alarm control panel signals an ALARM the following events will take place:
The sounders, I/O modules and other outputs will operate in accordance with their programming.
STATUS
STATUS
FIRE ALARM SYSTEM
FIRE ALARM SYSTEM
FIRE
FIRE
FAULT
FAULT
PRE-ALARM
PRE-ALARM
TEST
TEST
DISABLED
DISABLED
SYSTEM ON
SYSTEM ON
ALARM FAULT
ALARM FAULT
SUPPLY FAULT
SUPPLY FAULT
PROC. FAULT
PROC. FAULT
TRANS. FAULT
TRANS. FAULT
SOUND ALARMS
SOUND ALARMS
PAPER FEED
PAPER FEED
LAMP TEST
LAMP TEST
SYSTEM RESET
SYSTEM RESET
ALARM SILENCE
ALARM SILENCE
DISABLED
DISABLED
TEST
TEST
FAULT
FAULT
FIRE
FIRE
AUXILIARY
RELAYS
AUXILIARY
RELAYS
FIRE BRIGADE
TRANSMISSION
FIRE BRIGADE
TRANSMISSION
SELECTED
DETECTORS
SELECTED
DETECTORS
ACTIVE
DELAYS
ACTIVE
DELAYS
FIRE BRIGADE
ACKNOWLEDGED
FIRE BRIGADE
ACKNOWLEDGED
ALARM DISPLAY
ALARM DISPLAY
JUNO-NET
JUNO-NET
MANUFACTURED TO THE
REQUIREMENTS OF
EN54 Pt 2 & Pt 4 1999
MANUFACTURED TO THE
REQUIREMENTS OF
EN54 Pt 2 & Pt 4 1999
FAULTS
FAULTS
CONTROLS
CONTROLS
DISABLEMENTS
DISABLEMENTS
QUEUE REVIEW
QUEUE REVIEW
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
14
14
15
15
16
16
17
17
18
18
19
19
21
21
23
23
22
22
20
20
25
25
24
24
27
27
26
26
29
29
30
30
32
32
33
31
31
28
28
34
34
35
35
LCD DISPLAY
LCD DISPLAY
EVACUATE IN ACCORDANCE WITH THE SITE PROCEDURE
ONLY WHEN AUTHORISED should you silence the alarms.
DO NOT PRESS UNTIL THE ALARM CONDITION HAS BEEN DEALT WITH.SYSTEM RESET
OPERATION
4
OPERATION & MAINTENANCE MANUAL
REVISION 0.7a
16-04-2004

Global JUNO-NET Specifications

General

Brand	Global
Model	JUNO-NET
Category	Fire Alarms
Language	English