OPERATION JUNO-NET
1.5 READ THE FIRE, FAULT, TEST AND DISABLED QUEUES
Fire, fault, test, and disabled messages are shown on the LCD display.
The LCD has a limited display area. If more messages exist than can be shown on the LCD display the
FIRE, FAULT, TEST or DISABLED LEDs illuminate on the QUEUE REVIEW area of the fascia. The following
procedure describes how to display the additional messages.
STATUS
STATUS
STATUS
STATUS
FIRE ALARM SYSTEM
FIRE ALARM SYSTEM
FIRE ALARM SYSTEM
FIRE ALARM SYSTEM
FIRE
FIRE
FIRE
FIRE
FAULT
FAULT
FAULT
FAULT
PRE-ALARM
PRE-ALARM
PRE-ALARM
PRE-ALARM
TEST
TEST
TEST
TEST
DISABLED
DISABLED
DISABLED
DISABLED
SYSTEM ON
SYSTEM ON
SYSTEM ON
SYSTEM ON
ALARM FAULT
ALARM FAULT
ALARM FAULT
ALARM FAULT
SUPPLY FAULT
SUPPLY FAULT
SUPPLY FAULT
SUPPLY FAULT
PROC. FAULT
PROC. FAULT
PROC. FAULT
PROC. FAULT
TRANS. FAULT
TRANS. FAULT
TRANS. FAULT
TRANS. FAULT
SOUND ALARMS
SOUND ALARMS
SOUND ALARMS
SOUND ALARMS
PAPER FEED
PAPER FEED
PAPER FEED
PAPER FEED
LAMP TEST
LAMP TEST
LAMP TEST
LAMP TEST
SYSTEM RESET
SYSTEM RESET
SYSTEM RESET
SYSTEM RESET
ALARM SILENCE
ALARM SILENCE
ALARM SILENCE
ALARM SILENCE
DISABLED
DISABLED
DISABLED
DISABLED
TEST
TEST
TEST
TEST
FAULT
FAULT
FAULT
FAULT
FIRE
FIRE
FIRE
FIRE
AUXILIARY
RELAYS
AUXILIARY
RELAYS
AUXILIARY
RELAYS
AUXILIARY
RELAYS
FIRE BRIGADE
TRANSMISSION
FIRE BRIGADE
TRANSMISSION
FIRE BRIGADE
TRANSMISSION
FIRE BRIGADE
TRANSMISSION
SELECTED
DETECTORS
SELECTED
DETECTORS
SELECTED
DETECTORS
SELECTED
DETECTORS
ACTIVE
DELAYS
ACTIVE
DELAYS
ACTIVE
DELAYS
ACTIVE
DELAYS
FIRE BRIGADE
ACKNOWLEDGED
FIRE BRIGADE
ACKNOWLEDGED
FIRE BRIGADE
ACKNOWLEDGED
FIRE BRIGADE
ACKNOWLEDGED
ALARM DISPLAY
ALARM DISPLAY
ALARM DISPLAY
ALARM DISPLAY
JUNO-NET
JUNO-NET
JUNO-NET
JUNO-NET
MANUFACTURED TO THE
REQUIREMENTS OF
EN54 Pt 2 & Pt 4 1999
MANUFACTURED TO THE
REQUIREMENTS OF
EN54 Pt 2 & Pt 4 1999
MANUFACTURED TO THE
REQUIREMENTS OF
EN54 Pt 2 & Pt 4 1999
MANUFACTURED TO THE
REQUIREMENTS OF
EN54 Pt 2 & Pt 4 1999
FAULTS
FAULTS
FAULTS
FAULTS
CONTROLS
CONTROLS
CONTROLS
CONTROLS
DISABLEMENTS
DISABLEMENTS
DISABLEMENTS
DISABLEMENTS
QUEUE REVIEW
QUEUE REVIEW
QUEUE REVIEW
QUEUE REVIEW
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
5
5
5
5
6
6
6
6
7
7
7
7
8
8
8
8
9
9
9
9
10
10
10
10
11
11
11
11
12
12
12
12
13
13
13
13
14
14
14
14
15
15
15
15
16
16
16
16
17
17
17
17
18
18
18
18
19
19
19
19
21
21
21
21
23
23
23
23
22
22
22
22
20
20
20
20
25
25
25
25
24
24
24
24
27
27
27
26
26
26
26
29
29
29
30
30
30
30
32
32
32
32
33
33
33
33
31
31
31
31
28
28
28
28
34
34
34
34
35
35
35
35
LCD DISPLAY
LCD DISPLAY
LCD DISPLAY
LCD DISPLAY
If the QUEUE REVIEW - FIRE is flashing RED....
Press the QUEUE REVIEW - FIRE to display the first queued message.
Press the button again to review the next queued message. Do this until all
messages have been reviewed. The LED stops flashing RED, but remains lit,
once all messages have been displayed.
After 20 seconds the first fire event will be re-displayed.
LED
button
If the QUEUE REVIEW - FAULT is flashing AMBER....
Press the QUEUE REVIEW - FAULT
The LED illuminates steady AMBER when all
messages have been displayed.
After 20 seconds the first fault will be re-displayed unless a fire has occurred in
which case the first fire will be re-displayed instead.
LED
button to display the first queued message.
Press the button again to review the next queued message. Do this until all
messages have been reviewed.
If the QUEUE REVIEW - TEST is illuminated AMBER....
Press the QUEUE REVIEW - TEST to display the Zones in test mode.
Sometimes not all the Zones in test mode can be displayed at once, in this case
press the button again to see the next set of Zones in test mode.
After 15 seconds the display will return to it’s quiescent state (usually the
company name and current time).
LED
button
If the QUEUE REVIEW -DISABLED is illuminated AMBER....
Press the QUEUE REVIEW -DISABLED to display the disablements on
the LCD.
LED
button
Sometimes not all the disablements can be displayed at once, in this
case press the button again to see the next set of disablements.
After 15 seconds the display will return to it’s quiescent state (usually the
company name and current time).
FIRE
FAULT
TEST
DISABLED
6
OPERATION & MAINTENANCE MANUAL
REVISION 0.7a
16-04-2004
To Next Page
Loading...
Need help?
General