Globalstar STX3 - Query Firmware Version Command (0 x05); Setup Command (0 x06)

8545-0198-01 Revision 1.9 STX3 Users Manual
9/24/2020 Globalstar, Inc. Confidential and Proprietary Page | 18
Header
Len
04
count
CRC1
CRC2
AA
05
04
XX
CC
CC
Example Response: AA 06 04 00 F4 33
Where the bursts remaining returned is: 0
5.2.2.5 Query Firmware Version (0x05)
The Query Firmware Version command requests the STX3 to return the current firmware version.
0x05
header
Len
cmd
CRC1
CRC2
AA
05
05
74
93
Command: AA 05 05 74 93
Response:
header
Len
4
FW major
FW minor
CRC1
CRC2
AA
7
5
XX
XX
CC
CC
Example Response: AA 07 05 01 07 E0 6A
Where the firmware version returned is: 1.7
5.2.2.6 Setup (0x06)
The Setup command requests the STX3 to use the specified current setup parameters. These are stored in non-volatile memory.
0x06
Command:
Where:
• RF channel : Valid values are: 0 = Channel A, 1 = Channel B, 2 = Channel C, 3 = Channel D
• # of bursts: Valid values are: 0x01 thru x14 (1 to 20 bursts)
• Minimum Burst Interval: Units of 5 seconds. Valid values are: 0x01 thru 0x3C (5 to 300 seconds)
• Maximum Burst Interval: Units of 5 seconds. Valid values are: 0x02 thru 0x78 (10 to 600 seconds)
Example Command: AA 0E 06 00 00 00 00 00 03 18 30 00 CE 9C
header len 04 RF channel # of Bursts Interval Min Interval Max RESERVED CRC1 CRC2
AA 0E 06 XX XX XX XX XX XX XX XX XX CC CC
RESERVED