weBBoat 4G Plus
73
Menu button (see page 65 - Fig. 16)
- Configuration wizard: guided weBBoat 4G Plus configuration procedure
- Control Panel: where you access the weBBoat 4G Plus status screen
- User registration: user registration form
- Technical assistance: send an email to ask Glomex for technical assistance.
To properly send the email to Glomex, weBBoat 4G Plus must be connected
to a data network. (If it is not connected to a data network, you can in any
case write the email that will be stored in the memory and will be sent as
soon as there is a connection)
- Glomex www: link to the Glomex website
- Glomex shop: link to the Glomex online shop
Refresh button: to update the status screen.
Options button: see page 78.
Internet via: displays the type of data network being used (3G/4G or Wi-Fi
will be displayed).
Connected via: displays the name of the network (SSID) you are connected
to (e.g. Glomex_weBBoat). You must be connected to the weBBoat 4G Plus
Wi-Fi network in order to properly view the data and system configuration.
XX dBm: signal level in dBm.
Mobile network connection status: displays the weBBoat 4G Plus status of
connection with your mobile carrier network.
Signal level: Signal level of the mobile network of the SIM being used (min.
1 / max. 5).
Provider Name of the telephone carrier connected.
Connection type: connection technology being used.
APN: APN being used.
Change APN: The APN has to be changed if the SIM is changed. See the SIM
1 CONFIGURATION section and the ALTERNATIVE APN CONFIGURATION
section (page 67).
IMEI: telephone module serial number.
To Next Page
Loading...