EasyManua.ls Logo

Glow-worm 30sxi - 10 Remove the Front Panel; 11 Electrical Connections

Glow-worm 30sxi
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0020092785_02 - 05/10 - Glow-worm
- 19 -
9.2.3 Multipleboilerchimneyue
Ø60/100mm(C43typeinstallation)
b
The ue connecting from the appliance to
the ue system must be supplied from the
manufacturer of the boiler.
b
C43 ue systems must not be a 'pressurised
system' but act under natural draught principles
b
C43 type ue systems must have their
own condensate drain tted and not allow
condensate to mix into other appliances
L
B
A
1
2
3
4
5
Key
1 Pressure balancing system
2 Air-inlet pipe
3 Collector pipe
4 Boiler
5 Inspection hatch
A Final storey
B Groundoor
Type Max length (L)
Ø 60/100 10 m
Each time an additional 90° bend is necessary (or 2 at 45°), the
length (L) must be reduced by 1 m.
Model 12sxi 18sxi 30sxi
Exhaust mass rate (g/s)
At min thermal load (40°C/30°C) 1.9 2.4 4.1
At max thermal load (80°C/60°C) 5.5 8.3 13.8
Exhaust temperature (°C)
At min thermal load (40°C/30°C) 47 45 41
At max thermal load (80°C/60°C) 69 65.7 71.4
INSTALLATION

Table of Contents

Other manuals for Glow-worm 30sxi

Related product manuals