EasyManua.ls Logo

Glow-worm 35cx - 8.3 User Controls; 9 Fault Finding; 9.1 Electrical Supply Failure; 9.2 Appliance Fails to Light

Glow-worm 35cx
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0020127401_00 - 06/11 - Glow-worm
HOW TO USE YOUR APPLIANCE
- 11 -
• Theboilerwilloperateautomatically.
• NOTE:Thedisplaywillindicatethe
Heatingsystemwatertemperatureora
faultcode(seesectionFaultFinding).
• Thecontrolpanelwillashanddisplay
allitsdigits.Itwillthenreturntothe
defaultdisplayanddependingonthe
selectedoperationandcontrols,display
thetemperaturesettingsandwater
pressure.
Pre heat
ComfortfeaturetomaintaintheDomestic
HotWatertemperature,whichimproves
theresponsetimeofhotwateratthetap.
ToaccessthePreHeatfunctionholdin
the"+"buttonfor5seconds.Thedisplay
willindicate(ashing)ifitisON/OFF(OF).
Pressingthe"-"buttonwillswitchthePre
HeatOFFandpressingthe"+"buttonwill
switchitON.After5secondsofinactivity
thedisplaywillresettoindicatethewater
pressure.
Switching off - Central Heating mode
• Pressthe"-"selectorbuttontoturn
OFFtheCentralHeating.
Alltheappliancefunctionswillbeswitched
off,exceptfrostprotection.
ANY ASSISTANCE?
9 Fault Finding
Inthissectionfaultcodesthatare
displayed,whichCANbecarriedoutby
theUSERtorestoreapplianceoperation
(Correctiveaction:...).Otherfaultcodes
MUSTbesolvedbyacompetentperson
only.
Like all condensing boilers
it will produce a plume of
condensation from the ue
terminal in cool weather.
This is due to the high
efciency and hence low ue
gas temperature of the boiler.
It is normal and not a fault
indication.
Ifanyfaultpersists,andyourappliancestill
does not work, leave it switched off and
contactyourcompetentperson.
9.1 Electrical Supply Failure
Theboilerwillnotworkwithoutan
electricalsupplyandnormaloperation
oftheboilershouldresumewhenthe
electricalsupplyisrestored.
Iftheboilerdoesnotresumenormal
operation,checktheexternalcontrols.
Itmaybenecessarytorestartyour
appliance.
• Torestarttheboiler,pressthereset
button,seechapter"Howtouseyour
appliance►Overview".
9.2 Appliance fails to light
TheLCDwilldisplayaashing'F'and
codenumber,
• Torestarttheboiler,pressthereset
button,seechapter"Howtouseyour
appliance►Overview".

Related product manuals