16
METER MEMORY
The meter stores the 450 most recent blood glucose test results
along with respective dates and times in its memory. To enter the
meter memory, start with the meter switched o.
Reviewing Test Results
1. Press and release M.
" ” will appear on the display. Press M again, and the rst reading
displayed is the last blood glucose result along with date, time and the
measurement mode.
2. Press M to recall the test results stored in the meter each time you press.
After the last test result, press M again and the meter will be switched o.
Alternatively you can press and hold M for 5 seconds to switch o the meter.
Reviewing Blood Glucose Day Average Results
1. Press and release M. When “ ” appears on the display, keep M pressed in
for 3 seconds until the ashing “ DAY AVG ” appears. Release M – your 7-day
average result measured in general mode will appear on the display.
2. Press M to review 14-, 21-, 28-, 60- and 90-day average results stored in
each measuring mode in the order of Gen, AC, then PC.
3. Exit the meter memory.
Keep pressing M – the meter will switch o after displaying the last test
result.
To Next Page
Loading...