GlucoCheck EVOLVE. - SETTING THE METER; Entering the Setting Mode; Setting the date; Setting the time format

5
SETTING THE METER
Before using your meter for the first time or after changing the meter
batteries, you should check and update the settings.
Entering the Setting Mode Mode
Start with the meter o (no test strip inserted).
1. Setting the date
The sequence of the date setting is: YEAR è MONTH è DAY.
With the YEAR / MONTH / DAY ashing in sequence, press the Main Button
(M) until the correct year/month/day appears. Press S.
2. Setting the time format
Press M to select the desired time format (12h or 24h). Press S.
3. Setting the time
With the HOUR / MINUTE ashing in sequence, press M until the
correct hour/minute appears. Press S.
4. Setting the low and high target range for measuring mode
The sequence of the low and high target range setting is
Gen low è Gen high è AC low è AC high è PC low è PC high.
With the settings mentioned above ashing in sequence, press M until the
desired target appears. Press S to conrm.
5. Deleting the memory
With “dEL” and “ ” on the display, press M and select “no” to keep the
results in memory then press S to skip. To delete all the results, press M and
select “yes” to delete all the memory records.
Open the battery compartment and press the
Set Button (S).