Need help?Do you have a question about the Gmate WHeeL System and is the answer not in the manual?
General| Measuring Time | 5 seconds |
|---|---|
| Dimensions | 51(W) x 89.5(L) x 17.5(T) mm |
| Weight | 43g (including battery) |
| Measurement Method | Electrochemical |
| Result Range | 20-600 mg/dL |
| Sample Type | Whole blood |
| Operating Conditions | 10-40°C, 10-90% RH |
Device is for personal self-testing of glucose levels using fresh capillary whole blood.
Detects electrical current variation from blood sample reaction with strip reagents.
Meter comes with preset time/date. Check and set for local time zone after battery change.
General warnings regarding system use, such as single use, blood type, and handling small parts.
Safety warnings for the meter itself, including water, chemicals, shock, and temperature.
Guidelines for storing and handling test strips to ensure accurate results and prevent damage.
Information on measuring blood from alternative body parts like arm, thigh, or calf.
What to do when test results are unusually low or high, or display 'Lo'/'HI'.
General guidelines for fasting and post-meal blood glucose levels for non-diabetic adults.
How to perform a control solution test to check meter and strip accuracy.
Step-by-step guide to replace the meter's battery.
Details on the meter's accuracy, precision, and regression statistics.
Proper methods for storing the meter, strips, and control solution to maintain performance.
How to check expiration dates and understand the impact on results.
Instructions for cleaning the meter using a soft cloth and mild detergent.
How to clean the lancing device and its accessories.
Information on the meter's compliance with electrostatic discharge and RF interference standards.
Details of the manufacturer's warranty for the Gmate™™WHeeL meter.
To Next Page
