Infotainment System 7-55
3. Say the complete phone number
to be stored at once with no
pauses.
.
If the system recognizes
the number, the response
is “OK, Storing”.
.
If the system does not
recognize the phone
number, the response is
“Store <Phone number>.
Please say yes or no.”
If the number is correct,
say “Yes”. If the number
is not correct, say “No”.
The system will ask for the
number again.
4. After the system stores the
phone number, it responds
“Please say the name tag”,
followed by a tone.
5. Say a name tag for the phone
number. The name tag is
recorded and the system
responds “About to store <name
tag>. Does that sound OK?.”
.
If the name tag does not
sound correct, say “No”
and repeat Step 5.
.
If the name tag sounds
correct, say “Yes” and the
name tag is stored. After
the number is stored the
system returns to the
main menu.
Using the Digit Store Command
The digit store command allows a
phone number to be stored by
entering the digits individually.
1. Press
b / g .
.
For vehicles without a
navigation system, the
system responds “Ready”,
followed by a tone.
.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone say
“Hands Free”. The system
responds “Ready”, followed
by a tone.
2. Say “Digit Store”. The system
responds with “Please say the
first digit to store”, followed by
a tone.
To Next Page
Loading...
