GMC Terrain 2011 - Page 222

Black plate (56,1)
GMC Terrain Owner Manual - 2011
7-56 Infotainment System
3. Say the first digit to be stored.
The system will repeat back the
digit it heard followed by a tone.
Continue entering digits until the
number to be stored is complete.
.
If an unwanted number is
recognized by the system,
say “Clear” at any time to
clear the last number.
.
To hear all of the numbers
recognized by the system,
say “Verify” at any time.
4. After the complete number has
been entered, say “Store”.
The system responds “Please
say the name tag”, followed by
a tone.
5. Say a name tag for the phone
number. The name tag is
recorded and the system
responds “About to store <name
tag>. Does that sound OK?”.
.
If the name tag does not
sound correct, say “No”
and repeat Step 5.
.
If the name tag sounds
correct, say “Yes” and the
name tag is stored. After
the number is stored the
system returns to the
main menu.
Using the Directory Command
The directory command lists all of
the name tags stored by the system.
To use the directory command:
1. Press
b / g .
.
For vehicles without a
navigation system, the
system responds “Ready”,
followed by a tone.
.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone say
“Hands Free”. The system
responds “Ready”, followed
by a tone.
2. Say “Directory”. The system
responds “Directory” and lists all
stored name tags. The system
returns to the main menu when
the list is complete.
Information Provided by: