GME TX677 - CHARGING THE BATTERY; Removing the Battery Pack; Refitting the Battery Pack

TX677 Instruction Manual
14
CHARGING THE BATTERY
The TX677 is powered by a 3.7V 1600mAh Li-ion battery pack. The battery pack
should be fully charged before being used for the rst time to ensure maximum
capacity is available.
REMOVING THE BATTERY PACK
1. Ensure that your radio is switched o.
2. Hold the radio upside down.
3. Using your ngernail, slide the battery catch towards the front of
the radio to release the battery then slide the battery towards you.
The battery pack should separate from the radio.
TX677 Instrucon Manual
12 June 2018
© 2018 Standard Communicaons Pty Ltd trading as GME. All rights reserved.
14
50157
Content
Charging the Baery
The TX677 is powered by a 3.7V 1600mAh Li-ion baery pack. The baery pack should be fully
charged before being used for the rst me to ensure maximum capacity is available.
Removing the Baery Pack
1. Ensure that your radio is switched o.
2. Hold the radio upside down.
3. Using your ngernail, slide the baery catch towards the front of the radio to release the
baery then slide the baery towards you. The baery pack should separate from the
radio.
Slide to release
Reng the Baery Pack
1. Ensure that your radio is switched o.
2. Align the slots in the baery pack with the baery guides on the back of the radio.
3. Slide the baery pack upwards as far as it will go unl it clicks.
Slide to lock baery
REFITTING THE BATTERY PACK
1. Ensure that your radio is switched o.
2. Align the slots in the battery pack with the battery guides on the
back of the radio.
3. Slide the battery pack upwards as far as it will go until it clicks.
TX677 Instrucon Manual
12 June 2018
© 2018 Standard Communicaons Pty Ltd trading as GME. All rights reserved.
14
50157
Content
Charging the Baery
The TX677 is powered by a 3.7V 1600mAh Li-ion baery pack. The baery pack should be fully
charged before being used for the rst me to ensure maximum capacity is available.
Removing the Baery Pack
1. Ensure that your radio is switched o.
2. Hold the radio upside down.
3. Using your ngernail, slide the baery catch towards the front of the radio to release the
baery then slide the baery towards you. The baery pack should separate from the
radio.
Slide to release
Reng the Baery Pack
1. Ensure that your radio is switched o.
2. Align the slots in the baery pack with the baery guides on the back of the radio.
3. Slide the baery pack upwards as far as it will go unl it clicks.
Slide to lock baery