GME TX677 - Button Beep

TX677 Instruction Manual
30
BUTTON BEEP
The Button Beep allows the radio to sound a conrmation beep whenever the keys
are pressed. It also generates a conrmation tone whenever the radio is switched
on.
To turn the button beep on or o:
1. Press and hold the Menu key until the radio beeps.
2. Press the Menu key repeatedly until ‘bP’ is displayed. The
TX677 Instrucon Manual
12 June 2018
© 2018 Standard Communicaons Pty Ltd trading as GME. All rights reserved.
27
50157
Content
Roger Beep Tone
The Roger Beep is a tone that is automacally transmied whenever the PTT switch is released. This
tone serves to alert the receiving party that your transmission has ended.
To enable or disable the roger beep tone:
1. Press and hold the Menu key unl the radio beeps.
2. Press the Menu key repeatedly unl ‘rb’ is displayed. The
icon will be ashing.
3. Press the or keys to select ‘on’ or ‘oF’.
4. Press the PTT switch to conrm and store your selecon.
5. When the roger beep tone is enabled, the
icon will be displayed.
Buon Beep
The Buon Beep allows the radio to sound a conrmaon beep whenever the keys are pressed. It
also generates a conrmaon tone whenever the radio is switched on.
To turn the buon beep on or o:
1. Press and hold the Menu key unl the radio beeps.
2. Press the Menu key repeatedly unl ‘bP’ is displayed. The
icon will be ashing.
3. Press the or keys to select ‘on’ or ‘oF’.
4. Press the PTT switch to conrm and store your selecon.
5. When the Buon Beep is enabled the
icon will be displayed and a beep will be heard
whenever a key is pressed.
Call Alarm Selecon
The radio provides 5 user-selectable Call Alarm melodies to alert other users to your incoming call.
When enabled, the melody can be transmied to another user where it will be heard in the speaker
of the receiving radio.
To select your favourite call alarm melody:
1. Press and hold the Menu key unl the radio beeps.
2. Press the Menu key repeatedly unl ‘CL ‘is displayed. Call number 1 – 5 or ‘oF’ will be
ashing.
3. Press the
or keys to preview (listen to) the 5 available Call Melodies (1 – 5).
4. To disable the call melodies, select ‘oF’.
5. Press the PTT switch to conrm and store your selecon.
icon
will be ashing.
3. Press the  or  keys to select ‘on’ or ‘oF’.
4. Press the PTT switch to conrm and store your selection.
5. When the Button Beep is enabled the
TX677 Instrucon Manual
12 June 2018
© 2018 Standard Communicaons Pty Ltd trading as GME. All rights reserved.
27
50157
Content
Roger Beep Tone
The Roger Beep is a tone that is automacally transmied whenever the PTT switch is released. This
tone serves to alert the receiving party that your transmission has ended.
To enable or disable the roger beep tone:
1. Press and hold the Menu key unl the radio beeps.
2. Press the Menu key repeatedly unl ‘rb’ is displayed. The
icon will be ashing.
3. Press the or keys to select ‘on’ or ‘oF’.
4. Press the PTT switch to conrm and store your selecon.
5. When the roger beep tone is enabled, the
icon will be displayed.
Buon Beep
The Buon Beep allows the radio to sound a conrmaon beep whenever the keys are pressed. It
also generates a conrmaon tone whenever the radio is switched on.
To turn the buon beep on or o:
1. Press and hold the Menu key unl the radio beeps.
2. Press the Menu key repeatedly unl ‘bP’ is displayed. The
icon will be ashing.
3. Press the or keys to select ‘on’ or ‘oF’.
4. Press the PTT switch to conrm and store your selecon.
5. When the Buon Beep is enabled the
icon will be displayed and a beep will be heard
whenever a key is pressed.
Call Alarm Selecon
The radio provides 5 user-selectable Call Alarm melodies to alert other users to your incoming call.
When enabled, the melody can be transmied to another user where it will be heard in the speaker
of the receiving radio.
To select your favourite call alarm melody:
1. Press and hold the Menu key unl the radio beeps.
2. Press the Menu key repeatedly unl ‘CL ‘is displayed. Call number 1 – 5 or ‘oF’ will be
ashing.
3. Press the
or keys to preview (listen to) the 5 available Call Melodies (1 – 5).
4. To disable the call melodies, select ‘oF’.
5. Press the PTT switch to conrm and store your selecon.
icon will be displayed
and a beep will be heard whenever a key is pressed.
CALL ALARM SELECTION
The radio provides 5 user-selectable Call Alarm melodies to alert other users to
your incoming call. When enabled, the melody can be transmitted to another user
where it will be heard in the speaker of the receiving radio.
To select your favourite call alarm melody:
1. Press and hold the Menu key until the radio beeps.
2. Press the Menu key repeatedly until ‘CL ‘is displayed. Call number
1 – 5 or ‘oF’ will be ashing.
3. Press the  or  keys to preview (listen to) the 5 available Call
Melodies (1 – 5).
4. To disable the call melodies, select ‘oF’.
5. Press the PTT switch to conrm and store your selection.
To send the Call Alarm Melody:
Press the PTT switch twice quickly. The
TX677 Instrucon Manual
12 June 2018
© 2018 Standard Communicaons Pty Ltd trading as GME. All rights reserved.
28
50157
Content
To send the Call Alarm Melody:
Press the PTT switch twice quickly. The icon will appear and the LED indicator will light red for a
few seconds as the melody is sent. The melody will be heard in the speaker of the receiving radio.
The Call Alarm can only be sent once per minute.
Dual Watch
The Dual Watch mode lets you to monitor two channels at the same me. While in dual watch
mode, the unit will monitor both the selected channel and a second dual watch channel.
To set the dual watch mode:
1. Use the or keys to choose the selected channel.
2. Press and hold the Menu key unl the radio beeps.
3. Press the Menu key repeatedly unl ‘dU’ is displayed. The
icon will be ashing.
4. Press the or keys to select the second ‘dual watch’ channel or select ‘oF’ to disable
the dual watch mode.
5. Press the PTT switch to conrm and store your selecon.
While dual watch is acve, the
icon and LCD will alternate between the selected channel and the
dual watch channel.
Dual Watch Operaon
• If a signal is received on either channel, the radio will pause on that channel for as long
as it remains busy, then resume the Dual Watch 5 seconds aer the last transmission has
ceased.
• To talk on the dual watch channel, press the PTT switch while the radio is paused on that
channel then talk in the usual way.
• To talk on the selected channel, press the PTT switch while no signals are being received.
The radio will switch to the selected channel. When you have nished your conversaon
the radio will resume the Dual Watch 5 seconds aer the last transmission has ceased.
To stop Dual Watch, briey press the Menu key followed by the key. This is equivalent to selecng
‘oF’ in the Dual Watch menu seng.
icon will appear and the LED indicator
will light red for a few seconds as the melody is sent. The melody will be heard in
the speaker of the receiving radio.
Note: The Call Alarm can only be sent once per minute.