Technology for safety
11
D1000 series - Intrinsically Safe Isolators
Example Configuration Report Sheet
SWC1090 Software
The SWC1090 software is designed to provide a PC user interface to configure programmable D1000 modules.
It easily allows the user to:
Read and write configuration parameters to the units (via COM port);
Store and restore data to and from local hard drive for backup or archive;
Load factory default configurations;
Monitor Input values via USB/COM port;
Print a report sheet containing configuration parameters and additional information
(see example on the right).
The SWC1090 is freely distributed at our website:
http://www.gmintsrl.com
D1000 Series Configuration
To Next Page
Loading...
