Press the Wi-Fi® button on the dash camera to enter
standby mode with the voice message “Registration
standby mode” (last 2 minutes)
SMARTPHONE CONNECTION
How to connect your smart phone - ANDROID
After installing the G-net application
* G-net application is not available while cloud mode is on.
Touch the "+" button to search for the dash
camera, then use the left and right arrows to
select your dash camera and touch
"Connection" on the screen.
For the rst registration, [★] appears.
The registration of the dash camera is completed when
you hear “User’s connected”.
* If the connection fails due to a weak Wi-Fi signal, please
re-insert the Wi-Fi dongle and press the Wi-Fi button on
the device again. When standby mode is on, try it again.
To Next Page
Loading...
