22 kW to 16 A CEE (red)
22 kW 16 A multiple domestic plugs
22 kW to 16 A CEE campingplug (blue)
go-eCharger adapter cable
22 kW Charger
Page 10
Scope of delivery:
Ÿ Charging box 11 kW with 16 A CEE plug (go-eCharger HOME+ 11 kW) or
Charging box 22 kW with 32 A CEE plug (go-eCharger HOME+ 22 kW)
Ÿ Wall mount incl. screws and dowels
Ÿ Optionally mountable cable protection (anti-theft protection)
Ÿ One Reset card (keep in safe custody) and one RFID chip
Ÿ Short instructions
Product specifications:
Ÿ Dimensions: approx. 15 x 25 cm x 9 cm
Ÿ Weight: approx. 2,0 kg
Ÿ Connection cable: 30 cm + plug (CEE red 16 A or CEE red 32 A)
Charging capacity:
Ÿ Maximum charging power 11 kW - (16 A 3-phase | HOME+ 11 kW) or 22 kW (32 A 3-phase | HOME+ 22
kW)
Ÿ Charging power adjustable between 1.4 kW and 11 kW (HOME+ 11 kW) or 1.4 kW and 22 kW (HOME+
22 kW) [depending on the number of phases (1- or 3-phase) and selected amperes (adjustable in 1
ampere steps between 6 A and 16/32 A)]
Optional adapters:
Vehicle side connection:
Ÿ Type 2 socket (type 2 cable not included in delivery)
Ÿ Locking device (theft protection)
Ÿ Vehicles with type 1 can be charged with adapter cable
Ÿ Ampere and charging status readable via LED ring or app
Ÿ Charging power adjustable via button and app
Security features:
Ÿ RFID access control
Ÿ RCD protection device with DC detection, 30 mA AC, 6 mA DC
Ÿ Phase and voltage test of the input voltage
Ÿ Phase test after contactor
Ÿ Current sensor 3-phase
Ÿ Ground check (switchable grounding monitoring)
Ÿ Customer replaceable fine fuse for internal electronics (triggers if supply line is connected incorrectly)
Ÿ Adapter detection with automatic reduction to 16 A (for go-eCharger HOME+ 22 kW and only when using
original go-e adapters)
Ÿ IP54 - Protection against dirt and water, suitable for permanent outdoor use
Ÿ go-e network operator API for authorised access of the electricity network operator to the go-eCharger for
network related power control
App an connectivity:
Ÿ Local (WLAN hotspot) or worldwide (via home WLAN) usable
Ÿ Charge monitoring (voltage, current, power, energy)
Ÿ Start/stop function
Ÿ RFID card management (up to 10 users per charger)
Ÿ Timer
Ÿ Electricity meter (total kWh and total amount per RFID card)
Ÿ Max Wh Charging
Ÿ Access management (RFID/App)
Ÿ Lock/Unlock functions
Ÿ Electricity price exchange connection with intelligent charge management
Ÿ Load balancing
Ÿ Photovoltaic connection via open API interface (programming required)
Ÿ LED adjustment
Ÿ Management of the charging levels via button on the charging box
Ÿ Modbus TCP (firmware version 0.40 or higher) for power control by the electricity network operator
Ÿ Updateable for later functions (Smart-Home,...)
Page 11
Scope of delivery
Optional
Reset card
RFID Chip
11 kW Charger
or
for HOME+ 11 kW for HOME+ 22 kW
Mounting set
11 kW to 16 A multiple domestic plugs
11 kW to 16 A CEE campingplug (blue)
11 kW to 32 A CEE (red)
Ÿ 22 kW HOME+ to CEE red 16 A (3-phase)
Ÿ 22 kW HOME+ to CEE blue 16 A (1-phase)
Ÿ 22 kW HOME+ to CEE blue 32 A (1-phase)
Ÿ 22 kW HOME+ to multiple domestic plugs
16 A (household socket outlet)
Ÿ 11 kW HOME+ to CEE red 32 A (3-phase)
Ÿ 11 kW HOME+ to CEE blue 16 A (1-phase)
Ÿ 11 kW HOME+ to multiple domestic plugs 16 A
(household socket outlet)
To Next Page
Loading...
