Need help?Do you have a question about the Godex EZ-1105P series and is the answer not in the manual?
Detailed steps for installing a new ribbon onto the printer.
Instructions for loading the label stock onto the label supply hub.
Specific instructions for loading labels with a label dispenser.
Guide to installing the printer driver software from the product CD.
Explains error indicators, beep signals, and provides solutions for common errors.
Common problems encountered with the printer and their solutions.
General| Weight | 2.5 kg |
|---|---|
| Print Method | Thermal Transfer / Direct Thermal |
| Print Resolution | 203 dpi |
| Media Width | 25.4 mm - 114 mm |
| Media Type | thermal transfer or direct thermal paper or film |
| Processor | 32 bit RISC CPU |
| Sensors | Reflective and transmissive sensors |
| Interface | USB, Serial (RS-232), Ethernet (optional) |
| Power | 100-240V AC, 50/60Hz |
| Label Width | 25.4 mm - 114 mm |
| Label Thickness | 0.06 mm - 0.25 mm |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
| Certifications | CE, FCC |
| Storage Temperature | -20°C - 60°C |
| Operating Humidity | 20% - 85% (non-condensing) |
To Next Page
