Need help?Do you have a question about the Godex RT700i SERIES and is the answer not in the manual?
Lists important safety instructions for operating the printer.
Details the items included in the printer's package.
Provides an overview of the printer's front, rear, and bottom views.
Explains internal components like the platen and sensor modules.
Details the components involved in the printer's printing mechanism.
Step-by-step guide on how to open the printer cover.
Instructions for assembling and loading a new ribbon module.
Guide on how to load the label stock onto the printer.
Steps to connect the printer to a computer via power and data cables.
Instructions for installing drivers and software using the CD.
Alternative method for installing printer drivers from the CD.
Explains the functions of the printer's operation panel buttons.
Overview of the printer's LCD screen and navigation basics.
Configuration steps for the printer's network (LAN) settings.
Instructions on how to enable and set a password for the LCD interface.
Details the functions available through the printer's LCD menu.
How to perform label calibration and run a self-test.
Lists common printer errors, their causes, and solutions.
Explains the use of the USB host port for memory sticks, keyboards, and scanners.
Procedure to enter dump mode for troubleshooting.
Guide to install the NetSetting software for network configuration.
Overview of the NetSetting software interface.
Configuration of printer IP address, gateway, and password.
Setting up email/SNMP alerts for printer errors.
Configures which error cases trigger alert notifications.
Adjusts various printer settings through NetSetting software.
Interface for sending commands to the printer remotely.
Steps to update the printer's firmware using NetSetting.
General preparation steps before installing optional accessories.
Detailed guide on how to install the label dispenser accessory.
Instructions for loading label rolls with the dispenser.
Step-by-step instructions for installing the cutter accessory.
Guide on loading label rolls when the cutter is installed.
Procedures for cleaning the print head.
A guide to diagnose and resolve common printer problems.
Detailed technical specifications for the printers.
Details pin configurations for USB and Serial ports.
Commands for copying and moving files via USB stick.
Steps to install the Bluetooth 2.4G module.
Guide on connecting and using a Logitech K810 keyboard.
Steps to install the WiFi Printer Server Module.
How to set up and operate the WiFi Module.
Lists important safety instructions for operating the printer.
Details the items included in the printer's package.
Provides an overview of the printer's front, rear, and bottom views.
Explains internal components like the platen and sensor modules.
Details the components involved in the printer's printing mechanism.
Step-by-step guide on how to open the printer cover.
Instructions for assembling and loading a new ribbon module.
Guide on how to load the label stock onto the printer.
Steps to connect the printer to a computer via power and data cables.
Instructions for installing drivers and software using the CD.
Alternative method for installing printer drivers from the CD.
Explains the functions of the printer's operation panel buttons.
Overview of the printer's LCD screen and navigation basics.
Configuration steps for the printer's network (LAN) settings.
Instructions on how to enable and set a password for the LCD interface.
Details the functions available through the printer's LCD menu.
How to perform label calibration and run a self-test.
Lists common printer errors, their causes, and solutions.
Explains the use of the USB host port for memory sticks, keyboards, and scanners.
Procedure to enter dump mode for troubleshooting.
Guide to install the NetSetting software for network configuration.
Overview of the NetSetting software interface.
Configuration of printer IP address, gateway, and password.
Setting up email/SNMP alerts for printer errors.
Configures which error cases trigger alert notifications.
Adjusts various printer settings through NetSetting software.
Interface for sending commands to the printer remotely.
Steps to update the printer's firmware using NetSetting.
General preparation steps before installing optional accessories.
Detailed guide on how to install the label dispenser accessory.
Instructions for loading label rolls with the dispenser.
Step-by-step instructions for installing the cutter accessory.
Guide on loading label rolls when the cutter is installed.
Procedures for cleaning the print head.
A guide to diagnose and resolve common printer problems.
Detailed technical specifications for the printers.
Details pin configurations for USB and Serial ports.
Commands for copying and moving files via USB stick.
Steps to install the Bluetooth 2.4G module.
Guide on connecting and using a Logitech K810 keyboard.
Steps to install the WiFi Printer Server Module.
How to set up and operate the WiFi Module.
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Max Print Width | 4.09" (104 mm) |
| Print Resolution | 203 dpi |
| Print Speed | 7 IPS (177.8 mm/s) |
| Max Print Length | 1727 mm (68") |
| Memory | 8 MB Flash, 16 MB SDRAM |
| Interface | USB 2.0, Serial RS-232, Ethernet |
| Processor | 32-bit RISC CPU |
| Sensors | Gap transmissive sensor, Black mark reflective sensor |
| Power | AC 100-240V, 50/60Hz |
| Label Width | 10 - 110 mm |
| Label Thickness | 0.06 - 0.25 mm (2.36 - 9.84 mil) |
| Roll Outer Diameter | 127 mm (5") |
| Core Diameter | 25.4 mm (1") |
| Dimensions | 285 mm (W) x 171 mm (H) x 226 mm (D) |
| Weight | 5.5 lbs (2.5 Kg) |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Storage Temperature | -4°F to 122°F (-20°C to 50°C) |
| Operating Humidity | 30% - 85% non-condensing |
| Certifications | CE, FCC, RoHS |
To Next Page
