Godex RT700i SERIES User Manual

Appendix
Appendix
FILE MANIPULATION WHEN USING USB STICK
RT700i SERIES USER MANUAL
APPENDIX
File Manipulation
The files in both devices (USB memory stick and printer internal Flash memory) are able to copy and move by the
commands ‘’~MCPY’’ and ‘’MMOV’’ that sends from GoLabel on a PC via either connection - USB or Ethernet ports.

Copy
Syntax ~MCPY,s:o.x,d:o.x
Descripon Copy file from USB memory sck to Flash memory, or vise-versa
Parameter s = source device of stored object;
 “D” for USB memory sck; “F” for internal Flash memory
d = desnaon device of stored object
 “D” for USB memory sck; “F” for internal Flash memory
o = object name (file name); the name “o” is substuted for “*”
x = extension (file type), the type “x” is substuted by ”*”, or following
either one: D= database, A= Asia font, C= TTF font, E= Bit-Mapped
font, F= lab
el format, G= graphic, S= serial file, T= text, B= Unicode
Table.
Example ~MCPY,F:*.F,D:*.F
(Copy enre “Label Format” files from Flash memory to USB memory
sck)
~MCPY,D:*.G,F:*.G
(Copy enre “Graphic” files from USB memory sck to Flash Memory)
~MCPY,D:*.*,F:*.*
(Copy all object files from USB memory sck to Flash Memory)

Move
Syntax ~MMOV,s:o.x,d:o.x
Descripon Move files from USB memory sck to Flash memory or vise-versa
Parameter s = source device of stored object;
 “D” for USB memory sck; “F” for internal Flash memory
d = desnaon device of stored object
 “D” for USB memory sck; “F” for internal Flash memory
o = object name (file name); the name “o” is substuted for “*”
x = extension (file type), the type “x” is substuted by ”*”, or following
either one: D= database, A= Asia font, C= TTF font, E= Bit-Mappe
d
font, F= label format, G= graphic, S= serial file, T= text, B= Unicode
Table.
Example ~MMOV,F:*.F,D:*.F
(Move enre “Label Format” files from Flash memory to USB memory
sck)
~MMOV,D:*.G,F:*.G
(Move enre “Graphic” files from USB memory sck to Flash Memory)
~MMOV,D:*.*,F:*.*
(Move all object files from USB memory sck to Flash Memory)

Godex RT700i SERIES Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max Print Width	4.09" (104 mm)
Print Resolution	203 dpi
Print Speed	7 IPS (177.8 mm/s)
Max Print Length	1727 mm (68")
Memory	8 MB Flash, 16 MB SDRAM
Interface	USB 2.0, Serial RS-232, Ethernet
Processor	32-bit RISC CPU
Sensors	Gap transmissive sensor, Black mark reflective sensor
Power	AC 100-240V, 50/60Hz
Label Width	10 - 110 mm
Label Thickness	0.06 - 0.25 mm (2.36 - 9.84 mil)
Roll Outer Diameter	127 mm (5")
Core Diameter	25.4 mm (1")
Dimensions	285 mm (W) x 171 mm (H) x 226 mm (D)
Weight	5.5 lbs (2.5 Kg)
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-4°F to 122°F (-20°C to 50°C)
Operating Humidity	30% - 85% non-condensing
Certifications	CE, FCC, RoHS