Why does my Godex EZ-2 skip labels when printing?
If your Godex Printer's label printing jumps to the next label, verify that the label height setting matches the actual label height. Also, check the Label Transmit sensor for any dust.
What to do if my Godex EZ-2 Printer is not printing anything on the label?
If your Godex Printer is working but nothing is printing on the label, ensure the label is facing up and you're using thermal paper. Also, verify that you've selected the correct printer driver and the correct printer model on the platen.
Why is it difficult to load labels into my Godex EZ-2 Printer?
If you're finding it difficult to load the label roll into your Godex Printer, check if a label is stuck inside the printer and remove it. Also, ensure that the width and thickness of the label are within the specified limits.
What to do if my Godex EZ-2 Printer stops and the LED light turns red?
If your Godex Printer stops printing and the LED turns red, it could be due to a software setting or programming issue, so verify you are using the correct paper. Alternatively, a label jam might be the cause; in this case, remove the stuck label.
Why is my Godex EZ-2 printing labels in the wrong position?
If your Godex Printer is not printing in the correct position, examine the Label Transmit Sensor for dust. Also, verify with your label supplier that they've used the recommended backing material. If you're experienced, adjust the label transmit sensor. Ensure the label guide is properly positioned.
How to remove a stuck label from my Godex EZ-2?
If a label is stuck in your Godex Printer, remove it and use a soft cloth soaked in alcohol to clean any adhesive glue.
Why is my Godex Printer only printing part of the label?
If your Godex Printer only prints part of the label, it could be because the label is stuck on the print head, or the printer head is not fixed in proper position. Try re-positioning the printer head screws or clipper. The problem might also be related to software or improper margin settings.
How to improve print clarity on my Godex EZ-2?
If the print quality from your Godex Printer is not clear, check the printer darkness setting.
Why are dots missing when my Godex EZ-2 is printing?
If some dots are missing when printing with your Godex Printer, clean the printer head with alcohol. If the issue persists, consider replacing the printer head due to possible damage.
What to do if Godex EZ-2 Printer power is on but the LED doesn't light?
If the power switch of your Godex Printer is on but the LED does not light up, check the power connector.
Overview of the EZ-2/4 label printer and its capabilities.
Key technical specifications for EZ-2 and EZ-4 label printers, including print method and dimensions.
Details on the features and functionality of the bundled QLABEL-II labeling software.
Information regarding the Windows drivers necessary for EZ-2/4 printer operation.
Instructions for connecting the EZ-2/4 printer to a standard power outlet.
Steps to establish a connection between the EZ-2/4 printer and a personal computer.
Guide on how to properly load label rolls into the EZ-2/4 printer for operation.
Procedure for safely and correctly replacing the label roll in the EZ-2/4 printer.
Overview of the different types of software commands available for the EZ-2/4 printer.
Detailed descriptions of setup, formatting, and buffer mode commands for the printer.
Practical examples demonstrating the usage of various software commands for printing tasks.
To Next Page
General
