Godex RT700i SERIES User Manual

Contents
RT700i SERIES USER MANUAL
CONTENTS
1 Barcode Printer 001
1.1
1.2
Box Content
Getting to Know Your Printer
001
002
2 Printer Setup 006
2.1
2.2
2.3
2.4
2.5
Open the Printer
Loading the Ribbon
Loading the Label Roll Module
Connecting the Printer to the Host Computer
Installing Printer Driver and QLabel with Super
Wizard CD
006
007
012
014
016
3 Printer Setting and Control 021
3.1
3.2
3.3
3.4
3.5
3.6
Operation Panel
LCD Interface Introduction
LCD Interface Function
Label Calibration and Self Test
Error Alerts
021
022
026
028
030
034
4
NetSetting
for Ethernet
0
41
4.1
4.2
Installing the NetSetting Software
The Interface of NetSetting
041
042
5
Accessories
049
5.1
5.2
5.3
Preparation Steps
Installing the Label Dispenser
Installing the Cutter
049
051
057
6
Maintenance and Adjustment
061
6.1
6.2
Cleaning the Print Head
Troubleshooting
061
062
Appendix
Product Specifications
Interface
File Manipulation When Using USB Stick
3.7
3.8 USB Host
LAN Setting
LCD Password
036
038
Bluetooth Module
3.9 Dump Mode Begin 039
WiFi Printer Server Module Installation - For RT700iW/ RT730iW

Godex RT700i SERIES Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max Print Width	4.09" (104 mm)
Print Resolution	203 dpi
Print Speed	7 IPS (177.8 mm/s)
Max Print Length	1727 mm (68")
Memory	8 MB Flash, 16 MB SDRAM
Interface	USB 2.0, Serial RS-232, Ethernet
Processor	32-bit RISC CPU
Sensors	Gap transmissive sensor, Black mark reflective sensor
Power	AC 100-240V, 50/60Hz
Label Width	10 - 110 mm
Label Thickness	0.06 - 0.25 mm (2.36 - 9.84 mil)
Roll Outer Diameter	127 mm (5")
Core Diameter	25.4 mm (1")
Dimensions	285 mm (W) x 171 mm (H) x 226 mm (D)
Weight	5.5 lbs (2.5 Kg)
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-4°F to 122°F (-20°C to 50°C)
Operating Humidity	30% - 85% non-condensing
Certifications	CE, FCC, RoHS