Need help?Do you have a question about the Godwin Dri-Prime CD Series and is the answer not in the manual?
Explains the manual's objective to provide information for pump installation, operation, and maintenance.
Details the need for qualified personnel and proper tools for installation and maintenance.
Provides guidance on safe lifting practices and equipment for pump units.
Covers general safety rules for personnel, equipment, and operational hazards.
Provides guidance on parallel and angular alignment procedures for pump and driver.
Covers essential notes on installation suitability, pipework, and site conditions.
Explains how to operate the pump under flooded suction conditions, requiring disconnection.
Instructs on draining the pump and non-return valve in cold weather to prevent frost damage.
Details the re-greasing procedure for pump bearings, including frequency and method.
Explains how to check and maintain the seal coolant level to prevent seal failure.
Guides users through the precise steps for fitting mechanical seals to prevent damage.
Provides instructions for assembling bearing bracket and motor adaptor components.
Lists specific tool kits required for various pump models and their general purpose.
Provides an overview of pump model designations, sizes, and performance capacities.
Contains detailed technical specifications for the CD pump range.
Lists detailed technical specifications for the HL pump range.
Details technical specifications for the NC pump range.
Presents recommended tightening torques for various metric and UNC fasteners.
Provides guidance and figures for checking and adjusting belt tension.
General| Model | Dri-Prime CD Series |
|---|---|
| Manufacturer | Godwin Pumps |
| Category | Water Pump |
| Weight | Varies by model |
| Horsepower | Varies by model |
| Seal Type | Mechanical Seal |
| Engine | Diesel |
| Construction | Cast Iron, Stainless Steel |
| Type | Self-priming centrifugal pump |
To Next Page