Need help?Do you have a question about the Godwin Dri-Prime HL225M and is the answer not in the manual?
Safe lifting procedures and equipment requirements for safe operation.
General safety practices for personnel, equipment, and site.
Guidance on pump and driver alignment procedures for longevity.
Information on pump bearings and their maintenance requirements.
Steps for correctly re-greasing pump bearings at specified intervals.
Procedures for checking and maintaining mechanical seal coolant levels.
Safety precautions and steps for removing the mechanical seal.
Detailed steps for removing the front cover and pump body.
Procedures for safely removing the pump impeller.
Specific steps for removing various types of mechanical seals.
Precautions and steps for fitting mechanical seals correctly.
Detailed procedure for fitting various types of mechanical seals.
Procedures for fitting the pump impeller and setting clearance.
Instructions for dismantling bearing bracket and motor adaptor.
Specific dismantling steps for different pump types.
Instructions for assembling bearing bracket and motor adaptor.
Detailed assembly steps for bearing bracket/adaptor.
General| Pump Type | Dri-Prime |
|---|---|
| Model | HL225M |
| Engine Type | Diesel |
| Type | Centrifugal |
| Inlet Size | 8 inches |
| Outlet Size | 8 inches |
| Power Options | Diesel |
| Pump Size | 8 inches |
To Next Page