Need help?Do you have a question about the Godwin Dri-Prime CD103M and is the answer not in the manual?
Covers pump bearing maintenance, including re-greasing procedures.
Explains the process of removing the front cover and pump body.
Step-by-step guide on how to remove the pump impeller.
Details the procedure for removing the rear wear plate.
Instructions for removing various types of mechanical seals.
Outlines preparation steps, ensuring parts are clean and free from burrs.
Step-by-step instructions for fitting mechanical seals for various pump types.
Instructions for fitting the rear wear plate onto the pump.
Details the process of fitting the pump impeller correctly.
Explains how to fit the front cover and pump body assembly.
Steps to prepare for bearing bracket and motor adaptor dismantling.
General| Model | CD103M |
|---|---|
| Construction | Cast Iron |
| Pump Type | Self-priming centrifugal pump |
| Max Head | 48 m |
| Pump Size | 4 inches |
| Inlet Size | 4 in (100 mm) |
| Outlet Size | 4 in (100 mm) |
| Impeller Diameter | 261 mm |
| Solids Handling | 3 in (76 mm) |
To Next Page