Need help?Do you have a question about the Godwin Dri-Prime CD150M and is the answer not in the manual?
Provides instructions and illustrations for safe lifting of equipment, emphasizing suitable capacity and safe practices.
Provides guidance on pump and driver alignment, detailing parallel and angular misalignment checks.
Explains procedures for operating under flooded suction conditions, including disconnecting the compressor/vacuum pump.
Details pump bearing types and configurations, and explains the re-greasing procedure.
Explains the importance of maintaining the correct seal coolant level, types used, and checks required.
Provides step-by-step instructions and warnings for safely removing mechanical seals from the pump.
Details the procedure for removing the front cover and pump body, including notes for different pump types and jacking screws.
Explains how to safely remove the impeller, including locking the shaft and specific methods for different pump types.
Guides the user on removing the rear wear plate, detailing procedures for different pump types.
Details the process of removing single and double mechanical seals for various pump types with diagrams.
Details the procedure for fitting mechanical seals, including specific steps for different pump types.
General| Model | CD150M |
|---|---|
| Category | Water Pump |
| Max Solids Handling | 3 inches |
| Pump Size | 6 inches |
| Discharge Size | 6 inches |
| Dry Prime | Yes |
| Self-Priming | Yes |
| Suction Size | 6 inches |
To Next Page