GOGLOO E7 - Settings Explained; VIDEO RESOLUTION; RECORDING FILE LENGTH; PHOTO BURST NUMBER

10
10. Settings Explained
• VIDEO RESOLUTION ( Video Switch )= 0-1 def: 0
# (0=1080p@30fps, 1= 720p@60fps)
Note: This also can be done using the phone APP “Gogloo Camera”
and WIFI button Switch.
• RECORDING FILE LENGTH = 0 def: 0
# (0=5mins, 1=15mins, 2=30mins) recording interval time
Different Video file size for option, 5mins per file as default
• PHOTO BURST NUMBER = 0-2 def: 1
# (0=1 numbers Single Shot, 1=3 numbers, 2=5 numbers)
Snapshot quantity
• EV( Exposure) = 0-12 def: 6
# (0=2.0, 1=1.6, 2=1.3, 3=1.0, 4=0.6, 5=0.3, 6=0.0, 7=-0.3, 8=-0.6, 9=-1.0,
10=-1.3, 11=-1.6, 12=-2.0 )
Adjust exposure down in bright/sunny conditions.
Adjust exposure up in dark/cloudy conditions.
• SHARPNESS = 1-2 def: 1
# (0=SHARP, 1=NORMAL, 2=SOFT)
Increase or decrease the sharpness.
• QUALITY = 0-2 def: 0
# (0=fine, 1=good, 2=normal)
Change the video quality
• WHITE_BALANCE = 0-4 def: 0
# (0=WB_AUTO, 1=WB_DAYLIGHT, 2=WB_CLOUDY, 3=WB_TUNGSTEN,
4=WB_FLUORESCENT)
• LIGHT_FREQ = 0-1 def: 1
# (0=50HZ, 1=60HZ)
• DATE_STAMP = 0-1 def: 0
# (0=off, 1=on)
• AUDIO_VOLUME = 0-2 def: 0
# (0:Max, 1:Mid, 2:Min, 3:Off)
• LOW_BATTERY_HINTING = 0-2 def: 1
# (0=1min, 1=3min, 2=5min)
When low-battery, the LED light will be hint. Default: 3mins prior to hint
• AUTO_POWER_OFF = 0-3 def: 1
# (0=Off, 1=3min,2=5min,3=10min)
This function helps to save battery in Standby model.
When in standby mode, it will be auto power off according to our settings
• TIME_SET = N2016.01.01.00:00:00 # (Y=change N=No change
Please don’t change it
• RESET TO DEFAULTS = 0-1 def: 0
# (0=false, 1=true)
Note: when set to 1, the camera will ignore other settings,
set to system default and write the default settings in this file