computer provided by factory
4.2 Select the file namely " " , double-click left button of mouse.
4.3 Back to the root directory , there is a file namely "time”.txt built up.
4.4 Now open the “time” .txt file to set
Please note the blank space between date and time, note the blank
space between date/time and the Y/N option.
Showing the date/time, add "Y"(yes) : yyyy.mm.dd hh:mm:ss
Hiding the date/time, add "N"(no) : yyyy.mm.dd hh:mm:ss N
Example: 2016.08.10 16:53:05
4.5 Save it and then exit the storage disk safely.
4.6 Time is set and ready for new recording.
Note: This can also be done using the phone APP “Gogloo E7E9”.
5. Changing Video Resolution Settings
5.1. Under USB storage mode, open “SETTING”.txt from the root folder of
5.2. Setting “VIDEO RESOLUTION”, Set to “0” to turn on 1080p@30fps or set
to “1” to turn on 720p@60fps.
5.3. Saving the file and disconnect the glasses. The new setting takes effect
next time when you record a video.
Note: This also can be done using the phone APP “Gogloo E7E9”. Or click
WiFi button for 2 seconds to switch.
6.1. Under USB storage mode, open “SETTING”.txt from the root folder of
6.2. Setting “AUDIO_VOLUME”, Set “0” to max, set “1” to mid, set
“2” to min, set “3” to turn off audio.
7. Low Battery Hinting Settings
This device can help you avoid power off suddenly during exciting moment.
It sets low battery hinting, different time frame for your different choices.
7.1. Under USB storage mode, open “SETTING”.txt from the root folder of
7.2. Setting “LOW_BATTERY_HINTING”, set “0” to prior 1 min hinting, set
“1” to prior 3 mins hinting, set “2” to prior 5 mins hinting. 3 mins as
This function can help us save power. During standby mode, it can power off
8.1. Default Standby time: 1=3min.
8.2. Setting “0” to set no standby time, set “2” to set 5 mins, set “3”
Under “DEFAULT_SETTING”, when set to 1, the camera will ignore other
settings, it will set to system default and write the default settings in this file
To Next Page
Loading...