EasyManua.ls Logo

Gold Medal 2408 - User Manual

Gold Medal 2408
27 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© 2016 Gold Medal Products Co.
Part No. 59410
Instruction Manual
10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA
Fun Pop 8 oz. Popper
Model No. 2408, 2408BKG, 2408EX, 2408BKGX
Model2408BKG
Model2408

Table of Contents

Questions and Answers

  • A
    Aaron HoodAug 5, 2025
    Why are the popping cycles so long in my Gold Medal 2408 popcorn machine?
    • K
      Kevin GillAug 5, 2025
      If the popping cycles for your Gold Medal Kitchen Appliances popcorn machine are longer than 4 minutes when using salt popcorn, the issue could be due to several factors: * **Low Voltage:** The kettle might not be reaching the proper operating temperature. It's best to consult with a qualified electrician to check the voltage. * **Inadequate Supply Lines:** Undersized electrical supply lines or the use of an extension cord can prevent the kettle from reaching the correct temperature and also pose a fire hazard. A qualified electrician should inspect this. * **Inferior Corn:** The quality of the popcorn can affect popping cycles. Use only top-quality hybrid popcorn from reputable suppliers and ensure it's stored properly to avoid moisture or drying out.
  • K
    Kelly Alexander DDSAug 14, 2025
    Why is my Gold Medal 2408 kettle not heating up?
    • A
      Amanda RoseAug 15, 2025
      If your Gold Medal Kitchen Appliances kettle is not heating, here are a few things to check: 1. **Power to the Kettle:** Ensure that the kettle lead-in cord is properly plugged in and twisted to lock into the kettle receptacle. 2. **Kettle Heat Switch:** A qualified service person should check the voltage to and from the Kettle Heat Switch. If the switch is defective, it should be replaced. 3. **Heating Element:** The heating element in the kettle may be burned out. A qualified service person should inspect and repair it.
  • L
    Lauren HaysAug 25, 2025
    What to do if kettle agitator shaft is not rotating in Gold Medal 2408 Kitchen Appliances?
    • B
      Bradley SmithAug 26, 2025
      If the kettle agitator shaft is not rotating in your Gold Medal Kitchen Appliances machine, do not pop corn. The issue could be due to: * **Kettle Motor Switch:** Ensure the Kettle Motor Switch is turned ON. If it's ON and the shaft still isn't rotating, the switch or motor may be faulty. Contact qualified service personnel for inspection/repair. * **Kettle Agitator Shaft/Stir Blade:** Do not pop corn. Check the clearance between the kettle bottom and the stir blade; it should be 1/32” (use a dime). To adjust, reference the Agitator Set Collar Adjustment section.

Summary

SAFETY PRECAUTIONS

Electrical Safety and Water Precautions

Covers grounding, water immersion, cleaning, and cord placement.

Installation, Service, and Alteration Warnings

Prohibitions on improper installation, service, alterations, and use of timers.

Burn Hazards and Personal Protection

Warnings about hot surfaces, safety glasses, and qualified service personnel.

Operator Manual and Contact Information

Instruction to read manuals and how to order them.

Operational Restrictions and User Guidelines

Restrictions on public contact, minors, and supervision requirements for use.

Equipment Improvement and Service Contact

Note on equipment improvements and contact for technical service.

INSTALLATION INSTRUCTIONS

Inspection of Shipment

Instructions for checking the unit for damage upon arrival.

Manual and Model Description

Guidance on reading manuals and descriptions of different model numbers.

Items Included with this Unit

List and images of accessories provided with the popper.

Setup

Unit Preparation and Kettle Installation

Steps for removing packaging, placing unit, and installing kettle and bulb.

Power Cord Connection for Export Models

Instructions for connecting the IEC power cord for export models.

Electrical Requirements

Power Supply Specifications

Required voltage, wattage, and frequency for different models.

Grounding and Circuit Recommendations

Guidance on proper grounding, dedicated circuits, and avoiding extension cords.

Pre-Plug In Checks

Checks before plugging in: switches off, outlet compatibility, polarity, adapters.

Cord Damage Caution

Cautions regarding damaged power cords for different unit types.

OPERATING INSTRUCTIONS

Controls and Their Functions

Explanation of the Kettle Heat, Kettle Motor, and Lights/Warmer switches.

Popping Corn Instructions

Amount of Popcorn and Oil

Recommended quantities of popcorn, oil, and salt for popping.

Popping Standard (Salted) Popcorn Procedure

Step-by-step guide for popping popcorn, including test pops and shutdown.

Care and Cleaning

General Cleaning Safety

Safety warnings for cleaning, including grounding and avoiding water immersion.

Daily Kettle Cleaning Instructions

Detailed steps for cleaning the kettle, including using cleaning solution and handling cords.

Daily Unit Cleaning Instructions

Cleaning Exterior Surfaces

Instructions for cleaning glass, cabinet, and stainless steel parts.

Troubleshooting

Power and Kettle Heating Issues

Troubleshooting steps for when the unit has no power or the kettle does not heat.

Popping Cycle and Agitator Issues

Troubleshooting for long popping cycles, low voltage, and non-rotating agitator shafts.

Agitator Set Collar Adjustment

Steps to Adjust Set Collars

Detailed instructions and diagrams for adjusting agitator set collars.

MAINTENANCE INSTRUCTIONS

General Maintenance Safety

Safety warnings for maintenance, including grounding and qualified personnel.

Operator vs. Service Personnel

Distinction between tasks for operators and qualified service personnel.

ORDERING SPARE PARTS

How to Order Parts

Instructions on identifying, ordering parts, and contact information.

Replacing Broken Glass

Glass Panel Replacement Procedure

Step-by-step guide for safely replacing broken glass panels.

8 oz. Kettle Assembly - Agitator Assembly View

Agitator Assembly Parts List

List of parts for the agitator assembly with corresponding part numbers.

8 oz. Kettle Assembly (58000) - Kettle Bottom Assembly

Kettle Bottom Assembly Parts (58000)

List of parts for the kettle bottom assembly of the 58000 model.

8 oz. Kettle Assembly (58000 EX) - Kettle Bottom Assembly

Kettle Bottom Assembly Parts (58000 EX)

List of parts for the kettle bottom assembly of the 58000EX model.

Cabinet Exterior - Front View

Cabinet Exterior Front Parts List

Parts list and diagram for the front exterior of the cabinet.

Cabinet Exterior - Rear View

Cabinet Exterior Rear Parts List

Parts list and diagram for the rear exterior of the cabinet.

Cabinet Interior - Hanger Assembly;Controls View

Interior Controls Parts List

Parts list for interior hanger assembly and control components.

Cabinet Interior - Corn Pan;Element View

Corn Pan and Element Parts List

Parts list for the interior corn pan and heating element.

Dome Interior - Electrical Components

Dome Electrical Components List

Parts list for electrical components located inside the dome.

Safety Labels

Unit and Power Cord Labels

Identification of various safety labels for the unit and power cord.

Included Accessories

List and images of accessories provided with the popper.

Wiring Diagram

Wiring Diagram for Models 2408 and 2408 BKG

Electrical wiring schematic for 2408 and 2408BKG models.

Wiring Diagram

Wiring Diagram for Models 2408 EX and 2408 BKGX

Electrical wiring schematic for 2408EX and 2408BKGX models.

WARRANTY

Warranty Terms and Conditions

Details of the product warranty, duration, and exclusions.

Contacting Gold Medal Products Co.

Information on how to contact the manufacturer for service and warranty claims.

Gold Medal 2408 Specifications

General IconGeneral
Model2408
CategoryKitchen Appliances
TypeToaster
Number of Slices2
Browning ControlYes
Crumb TrayYes
Cord Length0.9m
Dimensions30.5 x 16.5 x 19.5 cm

Related product manuals