To Next PageTo Next PageHow to fix Gold's Gym Crosswalk 570 when the power does not turn on?
Ensure the power cord of your Gold's Gym Treadmill is plugged into a surge suppressor, and that the surge suppressor is connected to a properly-grounded outlet. Also, try removing and reinserting the key from the console. Lastly, check the power switch on the treadmill frame; if it's tripped (protruding), wait five minutes, then press it back in to reset it.
Why does the walking belt slow down when walked on my Gold's Gym Crosswalk 570 Treadmill?
If your Gold's Gym Treadmill's walking belt slows down when you walk on it, ensure you're using a single-outlet surge suppressor meeting the specifications on page 14. If that doesn't solve it, remove the key and unplug the power cord. Then, use a hex key to turn both idler roller screws counterclockwise by 1/4 of a turn. Properly tightened, you should be able to lift each edge of the belt 2-3 inches off the platform. If the issue persists, refer to the front cover of this manual.
What to do if the walking belt is off-center or slips on Gold's Gym Crosswalk 570 Treadmill?
If the walking belt of your Gold's Gym Treadmill is off-center, first remove the key and unplug the power cord. If the belt has shifted left, turn the left idler roller screw clockwise 1/2 turn. If it's shifted right, turn the left idler roller screw counterclockwise 1/2 turn. If the belt slips, remove the key and unplug the power cord, then turn both idler roller screws clockwise 1/4 turn.
Why does my Gold's Gym Crosswalk 570 power turn off during use?
If your Gold's Gym Treadmill turns off during use, check the power switch. If the switch has tripped, wait for five minutes and then press the switch back in.
What to do if the displays of the console do not function properly on Gold's Gym Crosswalk 570?
To address console display issues on your Gold's Gym Treadmill, remove the key and unplug the power cord. Place the treadmill in the storage position. After plugging the power cord back in, ensure the key is inserted into the console.
How to fix incline that does not change correctly on Gold's Gym Crosswalk 570?
To recalibrate the incline system of your Gold's Gym Treadmill, insert the key into the console and press one of the Incline buttons. While the incline is changing, remove the key. After a few seconds, reinsert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level.
General| Motor | 2.5 HP |
|---|---|
| Running Area | 20" x 55" |
| Incline | 0-10% |
| Weight Capacity | 300 lbs |
| Display | LCD |
| Folding | Yes |
| Weight | 200 lbs |
List and illustrations of hardware required for treadmill assembly.
Instructions for safely connecting the treadmill's power cord.
Overview of the treadmill console's functions and capabilities.
Step-by-step guide to operating the treadmill in manual mode.
