Golden Technologies GP162 - Assembling Your LiteRider PTC; Main Components Identification

LiteRider PTC_GP162_Owner’s Manual Rev C_022114
IV. ASSEMBLY
Your LiteRider PTC is shipped partially disassembled in order to maximize the protection of
all its parts during the shipping process. Please follow the instructions below to quickly and
easily assemble the power chair for your use.
You will need only basic tools. If you do not have the required tools, or if you
do not feel capable of safely assembling your power chair, please contact your local Golden
Technologies, Inc. representative.
Main Components
1. Base with Under-the-Seat Basket
2. Battery Pack
3. Seat Assembly
4. Joystick
5. Foot Plate

11
Base 
Batter
y
Pac
k

Seat Assembly
Joystick
Foot Plate
Under-the-Seat Basket
Figure 1