Golden Technologies GP162 - Operating Your Power Chair

LiteRider PTC_GP162_Owner’s Manual Rev C_022114
VII. OPERATION
Maximum Speed/Profile Indicator Flashes
This indicates the speed of the wheelchair is being limited for safety reasons. Contact
your Golden Technologies representative
The VR-2 modules are not user serviceable. Do not attempt to repair VR-2
modules.
FREEWHEEL MODE
♦ To disengage the brakes and put your power chair in freewheel mode, push the
freewheel levers down. See figure 16.
♦ To re-engage the brakes and take your chair out of freewheel mode, pull the freewheel
levers up. See figure 16.
 

Never put your power chair in freewheel mode when it is on a slope
or incline of any type.
Never put your power chair in freewheel mode while you are
operating your power chair.
27
Freewheel
Drive
Figure
1
6