LiteRider PTC_GP162_Owner’s Manual Rev C_022114
Socket/Wrenches - 17mm, 14mm, 10mm, and 8mm.
Allen Wrenches
8mm
5mm
and 4mm.
Thank you for purchasing your LiteRider PTC (Personal Transport Chair). We are honored
you have chosen Golden Technologies for your mobility needs.
LiteRider PTC Model GP162
Standard Packing List:
1 Owner’s Manual
Base with Under-the-Seat Basket
1 Battery Pack
1 Seat
2 Seat Arms
1 Joystick Control
1 Battery Charger
Seat Post Nut and Bolt
FOR YOUR RECORDS
Please fill in your LiteRider PTC information below. This information will be useful in the
event that you ever need to contact Golden Technologies, Inc. concerning your power chair.
Your LiteRider PTC
Model ____________________ Serial Number _____________________________
Date of Purchase ________________________ Body Color __________________
Options _______________________________________________________________
Your Golden representative or dealer
Name _________________________________________________________________
Company _____________________________________________________________
Address _______________________________________________________________
Please remember to fill in and return your warranty registration card.
Tools Required:
The following tools will allow you to make all comfort adjustments to your power chair.
DISCLAIMER
We ask that you read this manual completely before operating your new LiteRider PTC.
Golden Technologies, Inc. is not and cannot be held responsible for any damage or injury
incurred due to improper or unsafe use of the Golden LiteRider PTC. Golden Technologies,
Inc. specifically disclaims responsibility for any bodily injury or property damage that may
occur during any use that does not comply with applicable federal, state, or local laws or
ordinances.
2
To Next Page
Loading...
