Need help?Do you have a question about the golmar SV-1370 SII Colour and is the answer not in the manual?
General| Brand | golmar |
|---|---|
| Model | SV-1370 SII Colour |
| Category | Intercom System |
| Language | English |
Essential guidelines for safe and correct installation and usage of the video intercom system.
Details the technical specifications and features of the Golmar video door entry system.
Explains how to use the video intercom system for calls, communication, and door release.
Identifies and describes the components of the PVS-1220 door panel.
Guidance on optimal placement and height for the door panel installation.
Instructions for safely removing the front cover of the door panel.
Steps for mounting the door panel onto the wall after drilling.
Instructions for connecting the installation wires to the terminal connector.
How to adjust audio volume if it is not correct after starting the system.
Guide on how to customize the text label for the push button.
Steps to finish the door panel assembly by replacing the aluminium front.
Information on installing and technical features of the FA-122 power supply.
Instructions for installing the lock release mechanism in metal or wood doors.
Details the components and features of the 1370 SII Colour monitor.
Explains the purpose and operation of each function push button on the monitor.
How to adjust the incoming call volume using the regulator on the monitor.
Instructions for setting the monitor as master or slave in multi-monitor installations.
Steps to remove the monitor's bracket installation from its packaging.
Guidance on mounting the monitor bracket onto the wall, considering placement.
Instructions for connecting the installation wires to the monitor terminal connector.
Steps for attaching the monitor to its installed wall bracket.
How to adjust brightness, contrast, and colour of the monitor screen.
Procedure to select one of four different ring tones for monitor calls.
Enabling and using the intercom feature between two monitors in the same apartment.
Diagram illustrating wiring for installations with one or two door panels.
Wiring diagram for adding a second monitor to an existing installation.
Table detailing cable types and maximum distances for different terminals.
Diagram for connecting an AC lock release using a transformer and relay.
Diagrams for connecting auxiliary devices or gate automation controls.
Checks for power supply voltage, polarity, and short circuits when the system is unresponsive.
Troubleshooting steps for when the monitor fails to receive incoming calls.
Instructions on adjusting the monitor call volume.
Guidance on adjusting the audio levels for the system.
Checks for correct configuration and wiring for the intercom function.
Troubleshooting steps if the door release mechanism does not operate.
To Next Page
