golmar T562 GB2 User Manual

6
To change the ring tones open the telephone (see page 7) and press the hook switch.
Setting the ring tones:
While keeping the hook switch pressed, press the settings button. The telephone's handset will emit the con#gured
tone group.
To change the tone group, press the settings button until the desired tone group is heard; (up to 3 tone groups available,
presented in carousel mode).
To save the selection, release the hook switch. Next, close the telephone and replace the handset.
Ring tones (door panel, intercom and apartment door) can be modi#ed by pressing the settings button located to the
upper left, inside the telephone.
There are three tone groups and each group comprises three set tones. The #rst tone of each group that is heard during
selection, corresponds to door panel calls, the second tone to intercom calls and the third tone to apartment door calls.
Description:
Setting and selecting the call-tone group:
The telephone must be in standby to set and select the desired tone group.
Make a call to check the telephone has been con#gured with the desired tone group.
T562 G 2B TELEPHONE
TELEPHONE DESCRIPTION

golmar T562 GB2 Specifications

General

Brand	golmar
Model	T562 GB2
Category	Telephone
Language	English