golmar thera gb2 User Manual

CHARACTERISTICS
- Hands-free monitor.
- 7" TFT colour screen.
- Monitor with simple installation (unpolarised 2 wire BUS).
- Touch screen for access and selection of menu functions:
User menu:
- Display image from door panel(s).
- Display camera images (D-CAM-GB2 module required).
- Intercom calls within an apartment (inner broadcast).
- Intercom calls within an apartment (inner call).
- Intercom calls between apartments (name list call).
- Call the surveillance monitor.
- Display photos of door panel calls/cameras and delete photos (internal memory, capacity 118 photos).
- Display videos of door panel calls/cameras and delete videos (Micro-SD card required, using this card cancels
the photos option).
- Calls received log.
- Do not disturb mode (door panel or intercom calls are not received).
- Divert call (GSM-GB2 module required).
- Setup: ring tone, call volume, auto switch-on time, rename door/camera, time and date.
- Language selection (Spanish, English, French, Portuguese or Dutch).
Installer menu:
- Monitor as master or (slave 1, slave 2 or slave 3). Up to 4 monitors per apartment.
- Surveillance monitor.
-Allow the door panel image to be displayed on the slave monitor during a call.
-Activate intercom calls between apartments.
: (during auto switch-on or communication).Screen and volume settings menu
- Scene: Normal, bright, soft or user .image
- Brightness, contrast and colour.
- Monitor speaker volume.
- Start / stop communication capacitive touch switch. In standby it also displays the door panel image.
- Menu access capacitive touch switch.
- Door release activation capacitive push button.
- Different ring tones indicate the origin of the call (door panel, intercom or apartment door).
- Dip switches for setting the monitor address (call code).
- Input for calls from the landing door.
- Call repeater output (SAR-12/24).
SYSTEM OPERATION
- coustic tone will be heard confirming the call is inTo make a call, the visitor must press the button of the apartment; an a
progress once the push button has been pressed theand LED will turn on. If vocal synthesis is activated then a “call
is in progress be heard confirming the call in progress” message will is . At this moment the apartment's monitor
receives the call During the call the visitor can correct his call by pressing a push button corresponding to a different.
apartment, in which case the original call is cancelled.
- call lastsThe for 40 seconds. Without alerting the visitor, their image appears on the master monitor during this time. To
view the picture on a slave monitor this function must first be activated in the monitor the imagekit application. For villa :
appears on the monitor (with code 0 “apartment 1” or monitor with code 16 if the call is in “apartment 2”)address address
when receiving the call without the visitor being alerted.
If the call is not answered within 40 seconds, LED will turn off and the channel will be freed.
- To establish communication, press the monitor's push button and the door panel's LED will turn on.
If the vocal
synthesis is enabled the message “you can speak now” will be Heard confirming the communication is activated.
- .Communication will last for one and a half minutes or until the push button is pressed again When communication
has finished, LEDs will turn off and the will be freed. If vocal synthesis is activated then asystemand
“c finished” message willommunication is be heard in the door panel confirming the communication has finished.
- To open the door press the push button during the call or communication processes: one press will activate the
door release for five seconds and LED will also turn on for five seconds. If vocal synthesis is activated then a “door
is open” message will be heard in the door panel.
- .The descriptions of the function push buttons are found on page 4
3
THERA G 2B MONITOR

golmar thera gb2 Specifications

General

Brand	golmar
Model	thera gb2
Category	Monitor
Language	English