GÖLZ TS 200 - 4 Bringing into Service; Export Checking; Assembling

TS200 / TS250
Translation of the original operating instruction and spare parts list
- 17-
5007090-00
BA-E
®
4. Bringing into service
4.1 Export checking
Remove the transport packaging and place the unit vertically on a horizontal, flat and stable surface.
Dispose of the transport packaging according to environmental regulations. Since the unit is delivered
completely assembled, you need only check if it is complete and intact.
For the scope of delivery, see "Technical Data and Accessories".
4.2 Assembling
Some components must be mounted on the machine. Look at the following pictures.
Attention: Do not yet turn the engine on! The following work is to be done with the
engine being stopped!