Quick Setup3
3.1 Charging Your Water Speaker
1. Your Water Speaker has a built in rechargeable battery so it can be used
anywhere indoors, before using it for the first time please fully charge the
battery.
2. To charge, connect the USB cable provided to the USB port on your Water
Speaker.
3. Connect the other end of the USB cable to a USB port on your computer,
or a 5V 1A USB wall charger. A wall charger is not included, when your
Water Speaker is charging the LED indicator will show RED.
4. When the Water Speaker is fully charged the RED LED indicator will turn off.
5. When charging is completed, remove the USB cable.
Note: when the battery is getting low, the low battery warning alert will
sound, when you hear this, please recharge the battery.
To Next Page
Loading...
