Troubleshooting4
Depending on your requirements use either the Table Stand (just push firmly
into place) or if placing in your garden connect together the 2 parts of the
plastic Spike and push firmly into a suitable place in your garden, the Flame
speaker can then be pushed into the plastic spike.
Using the supplied Table Stand or Garden Spike3.4
When the Speaker is not in use for long periods of time store indoors in a cool,
dry location, if possible in original packaging. This Speaker is rated as IPX4
so can withstand splashing of water from any direction. Do not leave outdoors
for long periods of time or when there is heavy rain.
Storage3.5
Problem What to do
I can’t turn ON my
Flame Speaker.
Make sure that the Bluetooth Flame speaker
is fully charging.
Press the Power button for 3 seconds to turn
it ON.
I can’t hear my Music.
I can’t pair the
Bluetooth Flame
Speaker with my
Bluetooth device.
Turn on the Bluetooth Flame Speaker.
Make sure the Flame Speaker is “Pairing”
mode.
Make sure that your device is not further than
10 meters away from the Flame Speaker.
Turn the Flame Speaker to ON.
Use the volume control on your device to turn
the volume up.
To Next Page
