EasyManua.ls Logo

Goodmans Micro 1001 - CD Playback Features; Intro Play and Repeat Play; Remain Function Display; Tuner Operation

Goodmans Micro 1001
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HELPLINE PHONE NUMBER 0870 873 0080 HELPLINE PHONE NUMBER 0870 873 0080
13
14
INTRO PLAY(Remote control
only)
Press INTRO during STOP mode
the first 10 seconds of each track
on the disc will be played.
REPEAT PLAY
To listen to a track, disc or pro-
gramme over and over again, Use
the "REPEAT" function.
1. Press REPEAT/M-UP once.
2. "REPEAT" will be displayed in
the Display and all tracks on the
disc will be repeated.
3. Press REPEAT/M-UP twice,
"REPEAT"will flash in the
Display and current track will be
repeatedly played.
4. Press REPEAT/M-UP again to
cancel the repeat function.
REMAIN FUNCTION
In Radio Mode:
Press DISPLAY to change display
information as follows:
Freq display > Clock display > Timer
> (Freq display)
In CD Mode:
Press DISPLAY to change display
information as follows:
CD normal display > Clock display
> Timer (CD normal display)
For 'NORMAL PLAY'
1. Track elapsed time
2. Remain time on disc
3. Clock time
4. Timer
5. Track time elapsed time
TUNER OPERATION
TUNING
1. Press POWER to switch on the
unit.
2. Press TUNER button .
3. Select the tuning BAND with the
STOP/BAND button FM or MW.
4. Press SEARCH/CLK for
few seconds, then release the
button.
The tuner will automatically
search for the first broadcast
of sufficient strength.
Repeat this procedure if you
wish to select another station.
5. To tune to weak stations,briefly
depress SEARCH/CLK
continuously until you reach the
required frequency or the
reception is at its optimum.
6. Switch to MONO if there is
interference noise during FM
stereo reception. switch is
located at rear of player.
PROGRAMMING OF PRESET
STATIONS
1. Select the band with the STOP/
BAND button.
2. Tune to the desired station as
described under Tuning.
3. Press MEMORY/CLK ADJ.
"MEMORY" will start to flash.
4. Press REPEAT/M-UP to assign
a number (1-10) to the preset
station.
5. Press MEMORY/CLK ADJ
again. The frequency, preset
number and stereo setting are
now entered in the memory.
6. Repeat this procedure to store
other frequencies and preset in
the memory.
For 'RANDOM' & 'MEMORY'
1. Track elapsed time
2. Clock time
3. Timer
4. Track elapsed time
In Other Mode:
Press DISPLAY to change display
information as follows:
Clock display > Timer (Clock dis-
play)
Important note:
Please ensure that small chil-
dren/babies do not operate this
appliance. keep them away from
the motorized CD tray as
trapped fingers may hurt.
7. Upto 10 FM & 10 MW stations can be
stored.
TUNING TO PRESET STATIONS
Select a number between 1 and 20 by
pressing :
REPEAT/M-UP button.

Related product manuals