9
LISTENING TO COMPACT DISC (CD)
1. Open the CD door using CD DOOR (OPEN / CLOSE) BUTTON.
2. Insert the CD disc into the CD compartment, press the CD DOOR (OPEN / CLOSE) BUTTON again.
3. Press the CD button.
Playing The Entire Disc
1. Press the PLAY / PAUSE to start playback.
Playback starts with the first track. The display shown the current track number and its elapsed time.
2. To pause playback, press PLAY / PAUSE. The time elapsed indicator will flash.
3. To resume playback, press PLAY / PAUSE again.
4. To stop playback, press STOP.
Selecting A Different Track
1. Press TUNING / SKIP / SEARCH REV.or F.F.button on the unit (or remote) repeatedly until the required.
track number appears in the display.
2. Press PLAY / PAUSE button to start playback.
Repeat Play
1. To repeat the track you are listening to press the REPEAT button once and "REPEAT" will flash
on the display.
2. To repeat all of the tracks press the REPEAT button twice and "REPEAT" shows constantly on
the display.
3. To cancel repeat press repeat until "REPEAT" is removed from display.
Random Play
1. Press the RANDOM button once, and the "RANDOM" indicator will light up and the disc will
start playing in random order.
2. Press STOP button or RANDOM button to exit random mode.
Stopping Play
1. Press STOP if you wish to stop playback. The total number of track and total time will now appear in the
display.
2. Open the CD door on the unit to remove the CD.
Programming the CD Player
You can program upto 20 tracks to be played in any order.
1. Place the disc to be programmed in the tray. Press MEMORY / C-ADJ. button.
2. The display will show TRACK and P-01.
3. Use TUNING / SKIP / SEARCH REV. or F.F. button to select the first track to be programmed.
4. When the desired track appears on the display, press MEMORY /C-ADJ. button again.
5. The display will show TRACK and P-02.
6. Repeat this procedure to select other tracks that you wish to program into the memory.
Playing a program
1. Press PLAY / PAUSE.
2. Play starts with the first track of the program.
3. When all track have been played, the display shows the total number of tracks and the total
playing time of the CD.
Erasing a program
A program is erased if you :
Press MEMORY / C-ADJ. button then STOP button when the CD is stopped or switch the unit OFF
or opening the CD door.
To Next Page
Loading...
